A numerical model for Finite element analysis of reinforced concrete interior beam-column connections exposed to joint shear failure

A numerical model for Finite element analysis of reinforced concrete interior beam-column connections exposed to joint shear failure

Amin Dooshabi1 Mohammad Amir Najafgholipour Haghighi2 Seyed Mahdi Dehghan3 Arsalan Niroomandi4

1) Master Student of Earthquake Engineering, Faculty of Civil and Environmental Engineering Shiraz University of Technology
2) Assistant Prof. Faculty of Civil and Environmental Engineering, Department of Earthquake Engineering, Shiraz University of Technology
3) Assistant Prof. Faculty of Civil and Environmental Engineering, Department of Earthquake Engineering, Shiraz University of Technology
4) PhD Candidate, Department of Civil and Natural Resources, University of Canterbury Christchurch New Zealand

IOI Code : XYEA-BZDED
Publication : The 4th International Congress On Civil Engineering, Architecture & Urban Development(4icsau.ir)
Abstract :
    Nonlinear finite element analysis of an interior reinforced concrete beam-column connection subjected to static loading is performed in order to investigate the joint shear failure mode in terms of joint shear capacity, deformations and cracking pattern. RC beam-column connections can exhibit brittle behavior when severe damage is concentrated in the joint region. Brittle behavior in the joint region can deteriorate the ductile design philosophy and destroy the expected overall performance of structure when subjected to seismic lateral loading. Considering the importance of RC joint shear behavior and the influences of joint shear failure on strength, ductility and stability of RC moment resisting frames, a finite element model which focuses on joint shear behavior is presented in this paper. The finite element analysis is conducted in 3dimentional state and is capable of appropriately modeling the concrete stress-strain behavior, elements and boundary conditions. In order to define nonlinear behavior of reinforced concrete material, the concrete damage plasticity is applied to the numerical model as a distributed plasticity over the whole geometry. The results of numerical model is calibrated by experimental results of an interior beam-column connection of a non-ductile type building’s frame which is exposed to joint shear failure under quasi-static seismic loading. The comparison between experimental and numerical results indicates that the calibrated model properly predicts and simulates the joint shear failure response in the RC interior beam-column connections.

Keywords : 3d finite element analysis concrete damage plasticity reinforced concrete interior beam column connection joint shear failure numerical model