Effective parameters on bleaching wastewater containing dyes Reactive Red 120 and Reactive Black 5 in the presence of activated sludge adsorbent
Effective parameters on bleaching wastewater containing dyes Reactive Red 120 and Reactive Black 5 in the presence of activated sludge adsorbent
Mohammadreza Alah Gholi Ghasri1 Sima Habibi2 Donya Rahmani3
1) Assistant Professor of Chemistry, Faculty of Science,Islamic Azad University Of Yadegare
2) Textile Department, Faculty of Engineering,Islamic Azad University Of Yadegare Emam-
3) Applied Chemistry graduate student,Islamic Azad University Of Yadegare
IOI Code
:
XYHD-BFABF
Publication :
International Conference On Research Science And Technology(restconf.org)
Abstract :
Millions of gallons of wastewater daily color pigment is produced by the textile industry and mills. As a result, today more than ever the need for wastewater treatment color. The aim of this study was to determine parameters that affect the bleaching dyes Reactive Red 120 and Reactive Black 5 in the presence of activated sludge is catchy.Considering parameters such as pH, contact time, dye concentration and adsorbent dosage is. Waste water created artificial dyes. To determine the optimal pH range for the most appropriate changes in pH, 9-5 in the other laboratory parameters were considered constant and optimal pH 8 was obtained.To determine the optimal retention time in 5-3-1 hours was considered And by applying the optimal pH of the other parameters are fixed before and 3 hours, respectively. To determine the optimal concentration of dye concentrations were considered ppm50-40-30-20-10-5 And given the optimum parameters of the process before the other parameters constant, optimum concentration was 10 ppm dye.Finally by using the optimal parameters achieved in stages and with regard to the range (40-30-20-10)% of container volume prototype of absorbent activated sludge,The optimum adsorbent activated sludge was 30%. According to the results the highest removal efficiency at pH 8, retention time of 3 hours, dye concentration and adsorbent dosage of 10 ppm to 30%, is.
Keywords : reactive dyes ci reactive red 120 ci reactive black 5 absorbent activated sludge the optimum parameters