Factors affecting bleaching wastewater containing dyes Reactive Red 120 and Reactive Black 5 in the presence of powdered activated carbon adsorbent

Factors affecting bleaching wastewater containing dyes Reactive Red 120 and Reactive Black 5 in the presence of powdered activated carbon adsorbent

Mohammadreza Alah Gholi Ghasri1 Sima Habibi2 Donya Rahmani3

1) Assistant Professor of Chemistry, Faculty of Science,Islamic Azad University Of Yadegare
2) Textile Department, Faculty of Engineering, Islamic Azad University Of Yadegare
3) Applied Chemistry graduate student, Faculty Of Shohadaye Hasteyi, Islamic Azad University Of Yadegare Emam-

IOI Code : XYHD-BFADG
Publication : International Conference On Research Science And Technology(restconf.org)
Abstract :
    Textile industry is in great need of water. During the process of dyeing textiles are large amounts of dye into wastewater. There dyes in industrial effluents due to prevent light penetration into the water and the toxic effects of damage to the environment and its living creatures.So color wastewater treatment is very important. The aim of this study was to investigate the factors influencing the bleaching and removal of dyes Reactive Red 120 and Reactive Black 5 in the presence of activated carbon adsorbent powder. Factors affecting the bleaching of dyes under consideration include pH, reaction time, concentration and adsorbent dosage is dye.At first synthetic dye wastewater were created. To determine the optimal pH range to change the pH, (12-1) was considered and the optimal pH of 3 was fixed at the other laboratory parameters. Obtained.To determine the optimal concentration of dye concentrations ppm50-40-30-20-10-5 was considered and obtained by applying the optimum parameters of the process before the other parameters constant, optimum dye concentration of 10 ppm were obtained. By applying the optimal parameters obtained in the earlier stages and with regard to the range of g 0.4-0.3-0.2-0.1 for absorbent, the optimal amount of activated carbon sorbent g0.3 respectively. According to the results, the highest percentage of dye removal at pH 3, retention time of 7 hours, dye concentration and adsorbent dosage equivalent to ppm 10 g0.3 is.

Keywords : reactive dyes ci reactive red 120 ci reactive black 5 absorbent powdered activated carbon parameter optimization