The Investigation and Comparison of Thermal Methods in Enhanced Oil Recovery Based on Case Studies

The Investigation and Comparison of Thermal Methods in Enhanced Oil Recovery Based on Case Studies

Masoumeh Kouhi1 Mostafa Mohammadi2

1) PHD student of Chemical Engineering, Faculty of Chemical Engineering, Isfahan University Of Technology, Isfahan, Iran Email:
2) PHD student of Chemical Engineering, School of Chemical, Petroleum & Gas Engineering, Shiraz University, Shiraz, Iran Email:

IOI Code : XYHD-BFZGC
Publication : International Conference On Research Science And Technology(restconf.org)
Abstract :
    In many reservoirs due to the high viscosity of crude oil, primary recovery methods are not suitable, and therefore the effective recovery for these reservoirs, attention to reduce viscosity of in-situ oil by EOR with the help of thermal methods is necessary. Using these methods can produce, millions of barrels of heavy oil and tar sands that cannot recover by conventional techniques. In this study, some successful examples of thermal methods implementation in the Iran and the world oil fields were investigated to determination and comparison of basic screening. As for obtained results, for suitable thermal process selecting, three parameters, including depth, the average reservoir pressure and permeability were limiting factors. For the depth less than 3000ft, steam injection process and for the depth more than 3000ft in-situ combustion processes are suitable methods. Also, in steam injection the pressure is limitative, while, it is not limitative in in-situ combustion. In addition, in reservoirs with the lower permeability, in-situ combustion will give the better results than steam injection.

Keywords : viscosity enhanced oil recovery thermal methods heavy oil