CMOS Circuit Design the Reconfigurable Rectifier for Wireless Power Receiver

CMOS Circuit Design the Reconfigurable Rectifier for Wireless Power Receiver

sajad mosaybi1

1) Member of Electrical Faculty-Technical University of Golpayegan :

IOI Code : XBFC-DEHGE
Publication : 4th International Congress on Engineering, Technology and Applied Science - Auckland University of Technology(etas2019.com)
Abstract :
    In this paper, a wireless power transfer receiver is provided using a reconfigurable rectifier. The use of common rectifiers, ie, diodes, does not appear due to the high threshold voltage, the voltage conversion rate, or the proper output power. Therefore, in this scheme, active diodes instead of ordinary diodes, so that the rectifier works in less VAC, is preferable given. In this paper, a fully integrated 1X/2X rectifier is first provided in the range of 30 mW with all capacitors built into the chip. On the other hand, using a key arrangement in the chip, a suitable arrangement can be made in both 1X and 2X modes, so that the output capacitance difference in both modes is C4 and C3, respectively. The results obtained from the scheme are in the range of the input voltage of 1.25v-4v having output power of 32 mW and the VCR {Voltage Conversion Rate} in the conditions of RL=5 KΩ, in the 2X/1X modes are 0.78-0.88 and 1.3-1.6 respectively. And under similar conditions, the PCE {Power conversion efficiency} in both 2X/1X is 75-90 % and 68-82 %, respectively.

Keywords : wireless power transmission active rectifier inductive resonant coupling cmos integrated circuit