Laboratory Study of the Effects of Curing Intervals, conditions and Fiber Content on Geotechnical Properties of Lime-Cement Concrete (LCC)
Laboratory Study of the Effects of Curing Intervals, conditions and Fiber Content on Geotechnical Properties of Lime-Cement Concrete (LCC)
mohammad mostafa jafari1 masoud lakzadeh2
1) Department of Civil Engineering, Lecturer at Shahid Chamran University, Kerman, Iran
2) Department of Civil Engineering, Lecturer at Shahid Chamran University, Kerman, Iran
IOI Code
:
XBFC-DFBHE
Publication :
4th International Congress on Engineering, Technology and Applied Science - Auckland University of Technology(etas2019.com)
Abstract :
Abstract
Transferring the forces smaller than the bearing capacity of the soil is considered as the most important issue in geotechnical engineering from structure to under layers. One of the methods to preparing the base of structures used by geotechnical engineers is using lime-cement concrete (LCC). However, there are few studies related to the effects of Fiber content, curing intervals and conditions on geotechnical properties of LCC. Current research has tried to study the effects of curing intervals, curing conditions and Fiber content on geotechnical properties of LCC, such as unconfined compressive strength (UCS), secant modulus (Es), shear modulus (Gs), strain energy, bulk modulus (K), strain fracture and deformability index by using unconfined compression tests. At first, geotechnical and chemical properties of used materials were determined. In total, 48 samples were made and classified in several groups. The samples were made with 0%, 0.5%, 1% and 2% polyamide Fiber content, after curing time 3 and 7 days in furnace conditions and curing time 7 and 28 days in laboratory conditions. Then, all samples were tested to study the effects of different rates of Fiber content, curing time and conditions on their strength, strain energy, strain failure, deformability index, resilient modulus, shear modulus and bulk modulus by using unconfined compression tests. The results of this research showed that the UCS of cured samples for 7 days in furnace conditions was about 1.59 times greater than UCS of cured samples for 3 days in the same conditions. And the UCS of the samples that was 28 days in laboratory condition was 2.03 times greater than UCS of cured samples for 7 days in the same condition. Thus Curing Intervals is one of the effective factors on UCS of cured samples. Furthermore, the results showed that the UCS of the samples with 0%, 0.5%, 1% and 2% Fiber content that cured for 7 days in furnace condition comparison with those that cured for the same time and same Fiber content in laboratory condition was increased by 277%, 306%, 305% and 279% respectively that can show the effect of curing condition on the strength of samples. Current research showed that increasing Fiber content of LCC samples will increase the under area of stress-strain curve, it shows energy absorption capacity of materials in earthquake condition and geotechnical properties of the samples will improve, significantly.
Key words: Lime-Cement Concrete (LCC), Strain Energy, Curing Intervals, Unconfined Compressive Strength (UCS), Elastic Modulus (ES), Deformability Index, Fragility Index.
Keywords : lime cement concrete (lcc) strain energy curing intervals unconfined compressive strength (ucs) elastic modulus (es) deformability index fragility index