Analysis of the Amount of Displacement and Deformation of Arched Pedestrian Bridges Under the Loads Imposed on Them
Analysis of the Amount of Displacement and Deformation of Arched Pedestrian Bridges Under the Loads Imposed on Them
Ramin Rafiezadeh1
1) 1. Department of civil engineering, Faculty of advanced study, Islamic Azad university of Bushehr branch, Bushehr, Iran
IOI Code
:
XGAD-KZZZC
Publication :
First international Conference on applied researches in civil engineering, architecture and urban planning (icarcau.com/1st)
Abstract :
Arched bridges are bridges that have piers at each end shaped like a curved arch. Arch bridges work by partially transferring the weight of the bridge and its loads to a horizontal thrust supported by piers on either side. A passage (a long bridge) may be built through a series of arches. Arched bridges are one of the oldest types of bridges and have high natural resistance. The weight of the arched bridge is transferred to the outside along the curve of the arch, instead of pushing it down at each end. In recent years, pedestrian bridges have been used due to the ever-increasing traffic load and the resulting increase in road width. and streets, there has been a considerable increase. Therefore, it is important to identify the most suitable design according to the practical conditions. We know that in addition to the dead load, unexpected loads are applied to the structure of a pedestrian bridge during the operation period, such as earthquake load, advertisement boards and finally the additional load caused by accidents of various types of vehicles, which should be considered in order to reduce the damage and optimize the design of this type. structures, more attention should be paid. In this research, the structural systems of these types of bridges have been evaluated so that the most suitable system can be identified and used according to the type of load applied to the bridge structure. In this research, using the specialized software SAP2000, the arched metal pedestrian bridge has been investigated based on the types of loading. The general results showed that the structural systems of conventional pedestrian bridges have sufficient capacity against static and dynamic loads. In contrast to dynamic loads, the arch system has the lowest vibrations. According to the criteria of beauty, stability, satisfaction of pedestrians and construction costs, the most suitable option among the structural systems of pedestrian bridges is the arch system.
Keywords : pedestrian bridges arch bridge displacement rate deformation