Effect of Fibers on Flexural of Specific Concrete (Case study: Soil-Cement)
Effect of Fibers on Flexural of Specific Concrete (Case study: Soil-Cement)
Ehsan NamAvar Pashandi1 Saied Moghadaszadeh Bazzaz2 Nazanin Naini,3 Milad Tajdini4
1) Bs.C. Civil Engineering Isfahan Industrial university,
2) Ms.C. Construction Management, IAU Firoozkooh
3) Bs.C. Architectural Engineering IAU Yazd,
4) Ph.D. Geotechnical Engineering, Tabriz University,
IOI Code
:
XGFC-KBHFD
Publication :
8th.International Conference on Researches in Science & Engineering & 5th.International Congress on Civil, Architecture and Urbanism in Asia(8icrsie.com)
Abstract :
Soil-cement materials are an alternative to cement treated base (CTB) materials and the main difference between these two options, as described is that in CTB which generally is composed of fine aggregates, smaller amount of cement (3-5%) is used that this cement is used to reduce some undesirable characteristics of fine aggregate such as their large plasticity index and low bearing capacity. In addition, these materials do not need compaction in order to achieve the desired strength and also their compressive strength is often limited to 2MPa. Almost any type of soil can be used in soil-cement materials but organic soils, plastic clays and reactive sands are exceptions. Generally soils with 5-35% fine aggregates passing sieve No. 200 are the most economical efficient and soils with more than 2% organic material are seriously unacceptable. In this research
Keywords : soil cement fibre flexural cement treated base