Using modified-clay as green-natural flocculant for efficient microalgae harvesting
Using modified-clay as green-natural flocculant for efficient microalgae harvesting
Rasoul Keshmiri-Naqab1 Alireza Khaleghzadeh Ahangar2 Mohsen Taghavijeloudar3
1) 1. Department of Civil and Environmental Engineering Faculty, Babol University of Technology,
2) 1. Department of Civil and Environmental Engineering Faculty, Babol University of Technology,
3) 2. Department of Civil and Environmental Engineering, Seoul National University, 151-744, Seoul, South Korea
IOI Code
:
XGFC-KGGCB
Publication :
8th.International Conference on Researches in Science & Engineering & 5th.International Congress on Civil, Architecture and Urbanism in Asia(8icrsie.com)
Abstract :
Microalgae harvesting is one of the major bottlenecks of microalgae industries, constituting up to 30% of total biomass production costs. In this research, natural bentonite was modified with cationic surfactant to be implemented for microalgae harvesting. Characterizations of the clay and modified-clay were performed using SEM, FTIR and XRD. The effect of key parameters such as pHsolution and flocculants dosage on harvesting microalgae efficiency was investigated. The characterization results proved that the bentonite was successfully modified by cationic surfactant. The effect of pH indicated that increased pH leads to decreased harvesting efficiency. Maximum biomass harvesting of 95% was achieved using modified-clay under their optimum dosage of 0.8 g/L and after 200 min sedimentation time. Our finding suggested modified-clay as promising flocculant which could be applied as low-cost and eco-friendly for the harvesting of microalgae.
Keywords : modified clay microalgae harvesting surfactant