Efficient removal of dye from industrial wastewater using modified-clay as an eco-friendly adsorbent: Characterization and adsorption isotherm

Efficient removal of dye from industrial wastewater using modified-clay as an eco-friendly adsorbent: Characterization and adsorption isotherm

Rasoul Keshmiri-Naqab1 Sajad Keshmiri Naghab2 Mohsen Taghavijeloudar3

1) Department of Civil and Environmental Engineering Faculty, Babol University of Technology, P.O. Box: 47148-7313, Babol, Iran
2) Department of Civil Engineering Faculty, Hakim Sabzevari University, Sabzevar, Iran
3) Department of Civil and Environmental Engineering, Seoul National University, 151-744, Seoul, South Korea

IOI Code : XHHA-KFBKE
Publication : 5th. International Congress On Engineering, Technology and Applied Sciences(etas2023.com)
Abstract :
    Removal of dye pollutants produced from industrial wastewater has become a major concern of the environmental engineers. In this study, bentonite clay was modified by HDTMA surfactant for an efficient adsorption of dye from industrial wastewater. The characterization of the modified-clay was performed by scanning electron microscope (SEM) equipped with an X-Ray energy dispersion spectrometer (EDAX), and Fourier Transform Infrared Spectroscopy (FTIR). The effect of operational parameters such as pHsolution, initial concentration and adsorbent dosage on the removal efficiency of dye from aqueous solution were examined. Adsorption isotherm models were evaluated to determine the adsorption mechanism. The characterization results showed that bentonite clay was successfully modified by CTAB. The maximum dye adsorption efficiency of 90% by modified clay (8 fold more than clay with our modification) was recorded at the optimal conditions of pH = 5, initial concentration = 50 mg/l and adsorbent dosage = 0.8 g/L. Based on the isotherm adsorption modeling, the Langmuir model (qm = 77 mg/g, KL = 0.28 mg/g, R2 = 0.984) showed better match with the experimental data in comparison with Freundlich model (qm = 72, KF = 21, n = 2.4, R2 = 0.954) which ondicates that the adsorption mechanism was physically and monolayer.

Keywords : industrial wastewater dye removal modified clay adsorption isotherm