Modeling for prediction and optimization of heavy metals removal from water using modified sand filtration: Response surface methodology (RSM)
Modeling for prediction and optimization of heavy metals removal from water using modified sand filtration: Response surface methodology (RSM)
Hoda Ganji1 Mohsen Taghavijeloudar2 Saeed-Reza Khodashenas3
1) Department of Water Engineering, Ferdowsi University of Mashhad, 917966-6549, Mashhad, Iran
2) Department of Civil and Environmental Engineering, Seoul National University, 151-744, Seoul, South Korea
3) Department of Water Engineering, Ferdowsi University of Mashhad, 917966-6549, Mashhad, Iran
IOI Code
:
XKFA-AZFFGG
Publication :
Second International Conference on applied researches in civil engineering, architecture and urban planning (icarcau.com/2nd)
Abstract :
Heavy metals removal from polluted water is one of the main environmental concerns. Although modified sand filtration process showed a promising performance in heavy metals removal, the operational conditions play important role in the feasibility of using this approach. In this study, we used response surface methodology (RSM) in order to develop experimental model for prediction and find the optimal conditions for heavy metals removal from water by modified sand filtration with Pistachio hall waste (PHW). According to the results, the maximum removal of 77%, 68%, 61% and 79% were achieved for Pb, Cu, Co and Ni, respectively under the optimal conditions of flow rate (Q) = 5 mL/min, fixed-bed column height (H) = 10 cm and adsorbent PHW mas (M) = 7.4 g/kg. It was observed that, the PHW mass has the highest impact on heavy metals removal and then column height, while the flow rate had adverse impact on the final removal. Ultimately, four quadratic models were developed by the RSM to predict the removal efficiency of Pb, Cu, Co and Ni. The results of model evaluation revealed that the proposed model could accurately predict the removal efficiency (R2 > 0.999). This study provides a useful guideline for the application of modified sand filter in heavy metals removal from contaminated water.
Keywords : rsm heavy metals sand filtration modeling optimization phw