Efficient removal of per- and polyfluoroalkyl substances (PFAS) from water body using UiO-66 as metal based adsorbent (MOF)
Efficient removal of per- and polyfluoroalkyl substances (PFAS) from water body using UiO-66 as metal based adsorbent (MOF)
Amirarshia Nemati1 Amirmohammad Ramezani2 Mohsen Taghavijeloudar3 Massoud Rabian4
1) Department of Chemical Engineering, Babol University of Technology, Babol, Iran
2) Department of Chemical Engineering, Babol University of Technology, Babol, Iran
3) Department of Civil and Environmental Engineering, Seoul National University, 151-744, Seoul, South Korea
4) Department of Civil and Environmental Engineering, Babol Noshirvani University of Technology, Babol, Iran;
IOI Code
:
XKFK-AZHABG
Publication :
8th International Conference on Applied Researches in Science & Engineering (8carse.com)
Abstract :
The presence of per- and polyfluoroalkyl substances (PFAS) in water sources has become a significant environmental concern. Several methods have been proposed for PFAS removal from water; however, most of these techniques are not feasible at a large scale due to high costs and energy requirements. In contrast, adsorption processes have garnered considerable attention due to their high efficiency and ease of operation. In this study, UiO-66, a metal-organic framework (MOF), was evaluated as an adsorbent for the efficient removal of PFAS from water. To assess its performance, several jar adsorption experiments were conducted under varying conditions, including pH, contact time, adsorbent dosage, and initial PFAS concentration. Kinetic and isotherm models were applied to understand the adsorption mechanism. The results showed that under optimal conditions—pH 3, initial PFAS concentration of 25 mg/L, UiO-66 dosage of 0.1 g/L, and a contact time of 60 minutes—over 90% of PFAS could be removed, corresponding to an adsorption capacity of 470 mg/g. Kinetic and isotherm model analysis indicated that the adsorption data were best fitted to the Pseudo-First-Order (PFO) and Freundlich models, with R² values of 0.9954 and 0.9886, respectively. This study suggests that UiO-66 is a promising adsorbent for the efficient removal of PFOA from contaminated water.
Keywords : pfas adsorption mof uio 66 adsorption kinetic adsorption isotherms