3D SIMULATION OF THE EFFECTS OF ACCUMULATION OF FLOATING WOODY DEBRIS ON FLOW FIELD AND APPLIED FORCES ON BRIDGE PIERS

3D SIMULATION OF THE EFFECTS OF ACCUMULATION OF FLOATING WOODY DEBRIS ON FLOW FIELD AND APPLIED FORCES ON BRIDGE PIERS

Mohammad Nabavianpour1 Seyed Meysam Moshashaie2 Hossein Samadi Brojeni3 Behnam Motamedi4

1) Manager of River Engineering at Padidab Sepahan consulting Engineering Company
2) MSC Water Engineering Graduated From Shahrekord University. Iran.
3) Assoc. Prof., Water Engin. Dept., Faculty of Agric., Univ. of Shahrekord, Iran
4) MSC Graduate of Water Engineering

IOI Code : XYBH-AZCAB
Publication : International Conference on Civil Engineering, Architecture and Cityscape(iccacs.com)
Abstract :
    Floating woody debris reduce rivers cross-section of the river divert flow direction and increase the flow velocity bridge piers. So, they increase the intensity of vortices in front and behind bridge piers as well as increasing the rate of degradation. This study used FLUENT software in 3-dimensional state for simulating the flow field, and the effects of accumulation of floating woody debris in front of square bridge piers or square piers with sharp nose on flow fields, intensity of vortices and parameters such as drag coefficient or lift coefficient were investigated. Results showed that when the floating objects over the water surface are at the same level of water on the surface or under it, the flow speeds for square piers are increased max. 1.1, 1.36 and 1.54 times, and for square piers with sharp nose are increased max. 1.2, 1.5 and 1.67 times respectively, in comparison to the control sample. Moreover, the magnitude of formed vortices behind piers and along the affected area of intensified flow fields under floating objects in front of square piers are greater than that in front of square piers with sharp nose. Also, when the blockage rate (ratio of the occupied area of the flow by floating objects to the flow cross-section area) is 20.58% and the floating objects under the water surface are in front of bridge piers, the highest rates of force (drag and lift) are applied on the bridge piers.

Keywords : flow blockage accumulation of floating debris “k ε numerical model drag force normal forces to the flow (lift)