Design and Manufacturing of Prepreg Layer Used in Wind Turbine Blades Composite

Design and Manufacturing of Prepreg Layer Used in Wind Turbine Blades Composite

Mehrnoosh Hoor1 Sayena Rezanejhad2 Hamzeh Jodat3

1) Research Engineer Niroo Research Institute
2) Research Engineer Niroo Research Institute
3) Research Engineer Niroo Research Institute

IOI Code : XYCC-ABKHD
Publication : International Conference on Science and Engineering(icesconf.com)
Abstract :
    Wind turbine blades are manufactured using advanced composite materials as prepregs due to their specific properties and their flexibility for component construction. Their specifications depend on type, percentage and orientation of the fibers, type of matrix or resin, bond strength between fibers and matrix and selection of proper manufacturing parameters including cure temperature/time. Following the study on different types of prepregs used in wind turbine blades composite, in this research, the main aim is manufacturing of prepreg based on epoxy resin system by use of unidirectional E-glass fibers. The effect of processing conditions on prepreg properties including flow ability, adhesion, flexibility and storage time were investigated upon changing curing time and temperature. Prepreg specimens were made at 100, 110 and 120 oC for 5, 10 and 20 minutes. Physical and rheological tests have been performed on specimens to evaluate their properties. The B-Stage measure tests showed at least 45 days storage ability at room temperature for produced prepregs. Mechanical tests for the four ply unidirectional E-glass epoxy composite showed 1039 Mpa and the modulus equals with 33 Gpa for tensile strength and 1018 Mpa and the modulus equals with 25 Gpa for bending strength.

Keywords : prepreg wind turbine blade epoxy unidirectional e glass