An Analytical method to Estimate the Temperature Variation of Formation While Drilling Due to Drilling Fluid

An Analytical method to Estimate the Temperature Variation of Formation While Drilling Due to Drilling Fluid

Pouria Behnoud far1 Mohammad Javad Ameri2

1) Student of master degree, drilling engineering, petroleum engineering department, Amirkabir university of Technology, Iran
2) Professor assistant of Petroleum engineering department, Amirkabir university of Technology, Iran

IOI Code : XYDC-AGBFE
Publication : International Conference on Researches in Science & Engineering(icrsie.com)
Abstract :
    Estimation of temperature variation in wellbore and its near region is important. It can be used to calculate the temperature drilling fluid. In gas condensate reservoirs, temperature and controlling it is critical. Wellbore stability in hydrate reservoirs is very challenging and has a direct relation with temperature of formations. In general, temperature variation induces some extra stresses in wellbore. These induced stresses should be studied carefully in order to have a safe and successful drilling operation. The reason of changes in temperature is difference in temperature of drilling fluid and formations. In this article, temperature variations in three cases are studied. Heat may be transferred from drilling fluid and formation using conduction, convection of both of this phenomena. In formations with high permeability, temperature variation in formation occurs mainly due to convection and the effect of conduction can be ignored and the result will be accurate. High permeable sand stones are grouped in this case. In formations such as most of the shales, heat is transferred only by conduction. As these formations have a very poor permeability, fluid cannot flow throw them and no convection will occur. In formation of moderate permeability, both convection and conduction phenomena change the temperature of formation. At the first step, equations are driven, the equations are solved for each case analytically. As the solutions are in Laplacian s domain, Fourier s algorithm is used to convert the results to time domain. At the end, the temperature variation of a real case is obtained using the proposed models.

Keywords :