Evaluation of the tension in steel plate under combined loads

Evaluation of the tension in steel plate under combined loads

Nabard habibi1 Mansour farhadi2

1) Assistant professor, Mechanical Engineering Department,University of Kurdistan, Sanandaj, Iran,
2) A graduate student in Civil Engineering - Structural Engineering , University of Kurdistan, Sanandaj, Iran.

IOI Code : XYEA-AKDBZ
Publication : The 4th International Congress On Civil Engineering, Architecture & Urban Development(4icsau.ir)
Abstract :
    Strength of Materials Science Engineering is one of the oldest sciences. One of the branches of this science is widely used fracture mechanics. Due to the extensive progress and extensive knowledge of Engineering Fracture Mechanics of particular interest to researchers in the world. In this article we examine the tension in the steel plates. For this purpose, a steel sheet And put under the horizontal and vertical displacement of the tension steel sheets described above. In addition, by increasing the amount of displacement in horizontal and vertical direction to pay the amount of stress on the steel plate. The results showed an increase in tensions with the increased load, so that no matter how The displacement increase to the same amount of stress increases. The results show that stress in the horizontal direction is greater than the stress in the horizontal direction. In this study, the dimensions of the steel sheet is fixed.

Keywords : fracture mechanics tension steel plates displacement