Application of Advanced Materials in Externally Prestressed Concrete Bridges
Application of Advanced Materials in Externally Prestressed Concrete Bridges
Hosein Heidari Noori1 Iradj Mahmuodzadeh Kani2 Pourya Sam-Daliri3
1) 1. M.Sc. Student, College of Engineering, University of Tehran, Tehran, Iran,
2) 2. Professor, College of Engineering, University of Tehran, Tehran, Iran,
3) 3. Researcher, College of Engineering, University of Tehran, Tehran, Iran,
IOI Code
:
XYEA-AKDEB
Publication :
The 4th International Congress On Civil Engineering, Architecture & Urban Development(4icsau.ir)
Abstract :
The introduction of segmental technology, with its time saving and economic advantages, has resulted in widespread use of segmental prestressed box girder construction for medium to moderately long span bridges. An important development in the construction of box girder bridges is the use of external post-tensioning tendons in which tendons are external to the concrete cross section, as opposed to traditional internal tendons which are contained in ducts within the webs or flanges. External prestressing has been proven cost-effective and technically attractive worldwide. However, in these structures, exposed tendons are prone to corrosion. In addition, flexural resistance is of great concern, because the prestressing force developed in external tendons under ultimate loads is significantly less than that of internal tendons. On the other hand, increasing initial prestressing force rises the risk of cracking in the girder bridge under service loads and even during the construction. Therefore, innovative application of advanced materials such as fiber reinforced polymers (FRPs), as corrosion-resistant materials, in combination with high strength materials such as fiber reinforced concrete (FRC) is proposed in this study, as a solution being capable of tackling both of the issues.
Keywords : prestressed concrete bridge external tendon fiber reinforced polymer (frp) fiber reinforced concrete (frc)