CFD modelling of a municipal incinerator and reducing output Nitrogen Oxides by Selective Non Catalytic Reduction method
CFD modelling of a municipal incinerator and reducing output Nitrogen Oxides by Selective Non Catalytic Reduction method
Seyed Bahram Nourani Najafi1 Seyed Hossein Mansouri2 Hossein Fathi3
1) Master of Mechanical Engineering in Energy Conversion field, Shahid bahonar University of Kerman,Kerman, Iran. Email:
2) Full professor of Mechanical Engineering in Energy Conversion field, Shahid bahonar University of Kerman,Kerman, Iran. Email:
3) Phd student of Mechanical Engineering in Energy Conversion field, Shahid bahonar University of Kerman,Kerman, Iran.
IOI Code
:
XYGE-BDBDC
Publication :
3rd International Conference on Engineering and Applied Science (3iceasconf.com)
Abstract :
Nitrogen Oxides are one of the most dangerous pollutants which threaten human life. Selective Non Catalytic Reduction (SNCR) method is a Nitrogen Oxide reducing method whose advantages include low cost, catalyst free, ease of installation and applicability to all types of stationary fired equipment. In this research, an incinerator of Daejon in South Korea with waste quality of Daejon and Tehran was simulated and effective parameters on SNCR method were studied. Firstly, combustion of the incinerator with Daejon waste quality was simulated by Ansys Fluent commercial CFD toolbox and its radial temperature distribution was validated by reported experimental data. Then, combustion of the incinerator with Tehran s reported waste quality was modelled by considering 40%, 80% and 120% excess air. SNCR method reduction efficiency using 18% ammonia and urea solutions as reagents were studied, and suitable locations for injection were predicted. Results show that an increase in excess air percentage leads to adiabatic flame temperature reduction and that SNCR reduction efficiency strongly depends on parameters such as radial mean temperature of injection point, flue gas velocity and resident time, mass flow and droplet size of ammonia and urea reagents.
Keywords : waste incineration nitrogen oxide sncr droplet