2D-FEM Validation of Deadbeat Virtual Vector Predictive Control with Fixed Switching Frequency for Six-Phase Induction Motor Drives
2D-FEM Validation of Deadbeat Virtual Vector Predictive Control with Fixed Switching Frequency for Six-Phase Induction Motor Drives
zargham heidari1 nariman heidari2
1) 1. Department of Electrical Engineering, Islamic Azad University, Khormoj Branch, Khormoj, Iran
2) Department of Computer Engineering, Islamic Azad University, Bushehr Branch, Bushehr, Iran
IOI Code
:
AAHD-ABGCGA
Publication :
National Conference on Information Technology, Nanotechnology, Artificial Intelligence and Technological Futures Studies(itnaf.ir)
Abstract :
Six-phase induction motor drives (6PIM) represent an attractive solution for high-power and safety-critical applications due to their superior fault tolerance and higher power density compared to conventional three-phase counterparts. This paper presents a two-dimensional finite element analysis (2D-FEM) validation for a deadbeat virtual vector predictive control (DB-VV-MPC) strategy with fixed switching frequency. The proposed method synergistically integrates deadbeat control for analytical reference voltage calculation, virtual voltage vectors for inherent suppression of xy subspace harmonics, and symmetrical 7-segment modulation to guarantee constant switching frequency, simultaneously achieving excellent power quality and fast dynamics. In the previous paper, the performance of DB-VV-MPC was evaluated through comparative simulations in MATLAB/Simulink against DTC and FCS-MPC methods. The present paper is dedicated to validating the results using FEM analysis in ANSYS Maxwell for a 5.5 kW motor with 36 stator slots, 28 rotor slots, and 4 poles. FEM analysis results demonstrate excellent agreement with circuit simulation: current root mean square error (RMSE) of 0.32 A (2.7%), correlation coefficient R² of 0.986 between THD curves, and mean absolute percentage error (MAPE) of 2.4%. Magnetic flux density distribution analysis reveals a maximum flux density of 1.55 T in the stator teeth, well within the IEEE 112 recommended range (1.4-1.7 T). Air gap flux density measures 0.92 T, stator yoke flux density 1.28 T, and rotor teeth flux density 1.38 T. A saturation margin of 13.9% exceeds the minimum 8% recommended by IEC 60034-1. Flux line analysis confirms the correct four-pole pattern and disturbances with frequency 36 arising from slotting effects. Magnetic potential A distribution ranging from -0.015 to +0.015 Wb/m validates the accuracy of magnetic field modeling. The results of this paper provide comprehensive validation for the dynamic motor model presented in the previous work. The excellent agreement between FEM results and circuit simulation demonstrates that the Simulink-developed model accurately predicts the physical behavior of the motor. FEM analysis further confirms that the motor operates in the linear magnetic region with adequate saturation margin for rated condition performance. These results establish a solid foundation for practical implementation of the DB-VV-MPC method in industrial applications such as marine propulsion and electric vehicles.
Keywords: Deadbeat control, fixed switching frequency, model predictive control, six-phase induction motor, THD, virtual voltage vectors, finite element analysis, validation
Keywords : deadbeat control fixed switching frequency model predictive control six phase induction motor thd virtual voltage vectors finite element analysis validation