2D-FEM Validation of Deadbeat Virtual Vector Predictive Control with Fixed Switching Frequency for Six-Phase Induction Motor Drives

zargham heidari1 nariman heidari2

Abstract :
Six-phase induction motor drives (6PIM) represent an attractive solution for high-power and safety-critical applications due to their superior fault tolerance and higher power density compared to conventional three-phase counterparts. This paper presents a two-dimensional finite element analysis (2D-FEM) validation for a deadbeat virtual vector predictive control (DB-VV-MPC) strategy with fixed switching frequency. The proposed method synergistically integrates deadbeat control for analytical reference voltage calculation, virtual voltage vectors for inherent suppression of xy subspace harmonics, and symmetrical 7-segment modulation to guarantee constant switching frequency, simultaneously achieving excellent power quality and fast dynamics. In the previous paper, the performance of DB-VV-MPC was evaluated through comparative simulations in MATLAB/Simulink against DTC and FCS-MPC methods. The present paper is dedicated to validating the results using FEM analysis in ANSYS Maxwell for a 5.5 kW motor with 36 stator slots, 28 rotor slots, and 4 poles. FEM analysis results demonstrate excellent agreement with circuit simulation: current root mean square error (RMSE) of 0.32 A (2.7%), correlation coefficient R² of 0.986 between THD curves, and mean absolute percentage error (MAPE) of 2.4%. Magnetic flux density distribution analysis reveals a maximum flux density of 1.55 T in the stator teeth, well within the IEEE 112 recommended range (1.4-1.7 T). Air gap flux density measures 0.92 T, stator yoke flux density 1.28 T, and rotor teeth flux density 1.38 T. A saturation margin of 13.9% exceeds the minimum 8% recommended by IEC 60034-1. Flux line analysis confirms the correct four-pole pattern and disturbances with frequency 36 arising from slotting effects. Magnetic potential A distribution ranging from -0.015 to +0.015 Wb/m validates the accuracy of magnetic field modeling. The results of this paper provide comprehensive validation for the dynamic motor model presented in the previous work. The excellent agreement between FEM results and circuit simulation demonstrates that the Simulink-developed model accurately predicts the physical behavior of the motor. FEM analysis further confirms that the motor operates in the linear magnetic region with adequate saturation margin for rated condition performance. These results establish a solid foundation for practical implementation of the DB-VV-MPC method in industrial applications such as marine propulsion and electric vehicles. Keywords: Deadbeat control, fixed switching frequency, model predictive control, six-phase induction motor, THD, virtual voltage vectors, finite element analysis, validation

Keywords : deadbeat control fixed switching frequency model predictive control six phase induction motor thd virtual voltage vectors finite element analysis validation


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک و برق (کلیه گرایش ها)
محل انتشار : کنفرانس ملی فناوری اطلاعات، نانوتکنولوژی، هوش مصنوعی و آینده پژوهی فناوری
آدرس وب سایت کنفرانس : itnaf.ir
کد IOI مقاله : AAHD-ABGCGA
لینک مستقیم مقاله : https://isnac.ir/AAHD-ABGCGA

سایر مقالات ارائه دهنده
  1. تحلیل و شبیه سازی مبدل DC-DC سه سطحی کلید زنی ولتاژ صفر با دو ترانسفور ماتور سری
  2. تحلیل و شبیه سازی موتور القایی هفت فاز با چگالی گشتاور بالا و محدوده سرعت عریض
  3. بهبود سود درتوزیع انرژی الکتریکی با حضور منابع انرژی پراکنده با استفاده از الگوریتم کلونی مورچه ها وازدحام ذرات
  4. بهبود ولتاژ برای بارهای حساس در شبکه با بکارگیری DVR مبتنی بر کنترل فازی در زمان خطای اتصال کوتاه
  5. الگوریتم مدولاسیون برداری فضایی با کارایی محاسباتی بالا برای کنترل بهینه بلادرنگ اینورترهای هفت‌فاز مقیاس مگاواتی در کاربردهای صنعتی
  6. 2D-FEM Validation of Deadbeat Virtual Vector Predictive Control with Fixed Switching Frequency for Six-Phase Induction Motor Drives
  7. A Self-Stabilizing Protocol for Energy-Efficient Topology Control and Connectivity Management in WSNs
  8. A Self Stabilizing Token Based Distributed Torque Coordination for Large Scale Multi Motor Drives
  9. An Adaptive FOC-DTC Hybrid Strategy with a Fuzzy Decision-Making Unit and an RLS-Based Harmonic Compensator for Torque Ripple Minimization in a Nine-Phase Permanent Magnet Synchronous Motor
  10. Physics-Informed Lightweight Federated Learning with Explainability for Privacy-Preserving Predictive Maintenance of PMSM Drives: A Simulation Study
  11. Multiphase PMSM Design and Control for High-Rise Elevators: A Systematic Review and Topology Selection Framework
سایر مقالات محل انتشار
  1. A Study on Design Understandability and Interaction of the therapy-specific Robots
  2. طراحی و مهندسی یک حسگر زیستی نوری چند مدی پلاسمونیک مبتنی بر تشدیدگرهای حلقه شکاف برای سنجش جامع آنتی‌ژن
  3. طراحی یک اسیلاتورکنترل شونده با ولتاژ با نویز فاز بسیار پایین و بازه وسیع فرکانسی با تکنولوژی نانولوله کربنی برای کاربردهای PLL
  4. یک چارچوب هوشمند آگاه به زمینه برای ارتباطات V2V و V2Iدر شبکه‌های خودرویی شهرهای هوشمند با استفاده از داده‌های ترافیکی شبکه سلولی
  5. An Ensemble Non-Dominated Feature Selection Method: A Case Study on Prostate Cancer
  6. تشخیص زودهنگام پوسیدگی دندان با استفاده از شبکه‌های عصبی
  7. Simulation and Performance Comparison of Torque Tube and LVDT Sensors in Displacer-Based Level Measurement Systems
  8. ارتقا سامانه ناوبری پهپاد مهاجر ۶ با استفاده از فناوری
  9. کاربرد نانوذرات مگنتیت (Fe3O4) در پزشکی (از سنتز تا عملکرد)
  10. Simulation and Modeling of Floating-Gate Non-Volatile Memory Performance: Focus on Oxide Thickness, Programming Speed, and Charge Transport Mechanisms
  11. Fraud Analytics with Big Data: A Literature Review on Machine Learning Algorithms in Bankruptcy Prediction and Financial Fraud Detection
  12. تحلیل آینده‌پژوهانه هم‌گرایی هوش مصنوعی، فناوری نانو و فناوری اطلاعات در مسیر تحول صنعتی آینده
  13. نقش تحول دیجیتال در خدمات کتابخانه‌های عمومی برای توان‌یابان جسمی و ذهنی
  14. Prediction and Optimization of Oxygen Production under Microgravity Conditions Using Machine Learning
  15. Simulation and Performance Comparison of Ultrasonic, Non-Contact Radar, and Guided Wave Radar Sensors in Level Measurement Systems