Steel, Polypropylene, and PVA Fibers in UHPC and UHPGC: A Comparative Review of Mechanical and Thermal Performance
Steel, Polypropylene, and PVA Fibers in UHPC and UHPGC: A Comparative Review of Mechanical and Thermal Performance
Kiarash Farhadian Boroojerdi1 Danial Ghazi Mirsaeed2
1) Undergraduate Student, School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran -
2) Undergraduate Student, School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran -
IOI Code
:
ABFG-ACZFGH
Publication :
12th.international Congress on Civil Engineering, Architecture, Art and Urban Development(12icsau.ir)
Abstract :
Fiber reinforcement is widely used and often essential for post-cracking tensile ductility in ultra-high-performance concrete (UHPC), and, for certain fiber types, can also provide a release mechanism for the internal vapor pressure that drives explosive spalling under fire exposure. This review synthesizes and critically compares steel, polypropylene (PP), and polyvinyl alcohol (PVA) fibers in UHPC and ultra-high-performance geopolymer concrete (UHPGC). PP fiber melting at approximately 160–170 °C generates interconnected microchannels that relieve pore pressure and prevent explosive spalling in UHPC, whereas steel fiber alone does not increase matrix permeability and cannot suppress spalling despite improving tensile and flexural capacity. Hybrid PP–steel systems at 0.5–1.0% PP by volume typically preserve 40–85% of residual compressive strength after exposure to 700–1000 °C once spalling is controlled, and this combination emerges as the most thoroughly evidenced and mechanistically complementary pairing reviewed: steel supplies the tensile and flexural capacity that PP alone cannot, while PP supplies the fire-safety function that steel alone cannot. PVA fiber improves ambient- and moderate-temperature mechanical performance in both matrices through a dual mechanical–chemical bonding mechanism, but the one dataset spanning 20–800 °C in a geopolymer matrix reports a reversal to a strength deficit above 600 °C, and PVA fiber remains untested in any UHPGC matrix at elevated temperature. A newly available UHPGC-specific dataset indicates the geopolymer matrix may retain residual strength and tensile capacity more effectively than UHPC at 800 °C for steel fiber specifically, a provisional finding not yet extended to PP or PVA. Hybrid steel–PP UHPC is therefore identified as the best-supported combination for both mechanical performance and fire resistance, while steel-fiber UHPGC represents a promising but still provisionally supported alternative.
Keywords : ultra high performance concrete ultra high performance geopolymer concrete steel fiber polypropylene fiber poly vinyl alcohol fiber