رDesign and Performance Evaluation of Self-Healing Energy Absorbers in Urban Traffic Elements and Automotive Bumpers: A Passive Defense and Crashworthiness Approach
رDesign and Performance Evaluation of Self-Healing Energy Absorbers in Urban Traffic Elements and Automotive Bumpers: A Passive Defense and Crashworthiness Approach
Aida Jamaly1 Alireza Tarhani2
1) M.Sc. in Health, Safety and Environment (HSE), Mehr Alborz University
2) M.Sc. in Automotive Engineering, Iran University of Science and Technology (IUST)
IOI Code
:
ABKD-ACZHBC
Publication :
Fourth International Conference on applied researches in civil engineering, architecture and urban planning (icarcau.com)
Abstract :
Urban traffic elements and automotive bumpers share a common weakness: conventional energy absorbers dissipate energy through irreversible plastic deformation, so every collision, even a minor one, consumes part of the protective capacity and leaves the element damaged. This is costly in everyday traffic and unacceptable in passive defense, where protective elements must remain effective after repeated or successive impacts. This paper proposes and evaluates a two-tier self-healing energy absorber. Tier 1 is a reversible polymeric lattice based on an ionomer or supramolecular network that dissipates low-energy impacts through viscoelastic hysteresis and recovers its integrity through thermally activated healing; tier 2 is a conventional sacrificial crush element reserved for severe events. A lumped-parameter impact model, a healing-kinetics model combining reptation scaling with Arrhenius temperature dependence, and a capacity-degradation model for repeated impacts are developed. The concept is evaluated for a 1000 kg pendulum impact on a bumper at 4–10 km/h and for a 1100 kg vehicle striking an urban crash cushion at 30–100 km/h, using peak force, crush force efficiency, residual deformation, occupant impact velocity and occupant ridedown acceleration. In the modeled cases the bumper absorber lowers the peak force by 38 % at 4 km/h and leaves less than 1 mm of residual deformation after healing at speeds up to about 7 km/h, while the cushion keeps the occupant-risk indices within accepted limits at 100 km/h. A multi-criteria and life-cycle comparison favors the self-healing design unless initial cost dominates the decision. The results are analytical and require experimental validation.
Keywords : self healing materials energy absorber crashworthiness passive defense automotive bumper urban traffic safety