Comparison of input and absorbed energy in multi-story moment frames using fiber and bilin material

Comparison of input and absorbed energy in multi-story moment frames using fiber and bilin material

MOHSEN1 TAGHAVIJELOUDAR2

1) Department of Civil, Water and Environmental Engineering, Shahid Beheshti University, Tehran, Iran,
2) Department of Civil and Environmental Engineering, Seoul National University, 151-744, Seoul, South Korea,

IOI Code : AZEK-AADHGK
Publication : 4th International Conference on New Research & Achievements in Science, Engineering & Technologies(setbconf.com)
Abstract :
    Considering the method of material nonlinearity is a key aspect for nonlinear time history analysis. This study provides a comparison between two major and frequent nonlinear models named fiber and bilin. Two steel moment frames designed by NIST guidelines were subjected to two distinctive seismic records based on FEMA P695 database. The selected records for this study are records number 1 and number 3 of FEMA P695. The comparison is done through distributed energies in frames and components. The modified opensees was used for explicit computation of energy terms at both nodal and elemental levels, including input, kinetic, damping, strain, and hysteretic energies. A distributed plasticity fiber model and a lumped plasticity bilin model were employed to assess the influence of structural nonlinearity on energy demand and distribution. The results reveal a clear evolution in energy dissipation mechanisms with increasing building height for both methods. In the fiber and bilin models low-rise frames predominantly dissipate energy through column hysteresis, whereas high-rise structures exhibit energy concentration in beam hysteresis and damping effects. Furthermore, error analyses show that while the bilin model offers computational efficiency with lower prediction error, the fiber model provides enhanced resolution of internal energy. Overall, the study concludes that modeling nonlinearity does not vary significantly across low to high-rise structures. However, variations in ground motion characteristics may influence the results and lead to differences between fiber-based and bilin-based models.

Keywords : energy distribution steel moment frame nonlinear time history fiber bilin