جستجو
Comparison of input and absorbed energy in multi-story moment frames using fiber and bilin material
MOHSEN1 TAGHAVIJELOUDAR2
Abstract :
Considering the method of material nonlinearity is a key aspect for nonlinear time history analysis. This study provides a comparison between two major and frequent nonlinear models named fiber and bilin. Two steel moment frames designed by NIST guidelines were subjected to two distinctive seismic records based on FEMA P695 database. The selected records for this study are records number 1 and number 3 of FEMA P695. The comparison is done through distributed energies in frames and components. The modified opensees was used for explicit computation of energy terms at both nodal and elemental levels, including input, kinetic, damping, strain, and hysteretic energies. A distributed plasticity fiber model and a lumped plasticity bilin model were employed to assess the influence of structural nonlinearity on energy demand and distribution. The results reveal a clear evolution in energy dissipation mechanisms with increasing building height for both methods. In the fiber and bilin models low-rise frames predominantly dissipate energy through column hysteresis, whereas high-rise structures exhibit energy concentration in beam hysteresis and damping effects. Furthermore, error analyses show that while the bilin model offers computational efficiency with lower prediction error, the fiber model provides enhanced resolution of internal energy. Overall, the study concludes that modeling nonlinearity does not vary significantly across low to high-rise structures. However, variations in ground motion characteristics may influence the results and lead to differences between fiber-based and bilin-based models.
Keywords : energy distribution steel moment frame nonlinear time history fiber bilin
زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران
محل انتشار : چهارمین کنفرانس بین المللی پژوهش ها و دستاوردهای نو در علوم، مهندسی و فناوری های نوین
آدرس وب سایت کنفرانس : setbconf.com
کد IOI مقاله : AZEK-AADHGK
لینک مستقیم مقاله : https://isnac.ir/AZEK-AADHGK
سایر مقالات ارائه دهنده
- امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
- Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
- Qanat, a sustainable and environmentally friendly system for water resource management in arid area
- A novel approach for extraction of high value bio-products from microalgae using surfactants
- An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
- Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
- Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
- Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
- The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
- Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
- A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
- Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
- Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
- Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
- Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
- 3D Bioprinting in Organ Regeneration: Challenges, Innovations, and Future Prospects
- ارزیابی ریسک های مدیریت دانش پروژه با استفاده از یک رویکرد تلفیقی FMEA_ANP (مطالعه موردی: شرکت معدنی و صنعتی گل گهر)
- Advancements in 3D Bioprinting: Bridging the Gap Between Tissue Engineering and Regenerative Medicine
- بررسی میزان اثربخشی نمای دوجداره در پوشش های ساختمانی با تأکید بر کنترل فاکتورهای موثر در بهره وری مصرف انرژی
- پروتکل مک و متد جهتدار برای شبکههای ادهاک با مدل آنتنهای جهتدار
- بررسی نسل های مختلف فولادهای با استحکام بالا و مکانیزم های تغییر شکل آنها
- کاربرد هوش مصنوعی در بهینهسازی عملکرد انرژی ساختمانهای پایدار (تمرکز بر تکنولوژی)
- بررسی خصوصیات شیمیایی هیدروکلوئیدها به منظور افزایش ماندگاری برگر ماهی کفال
- بررسی مدیریتی وجود فلزات سنگین در برنج محلی کشاورزان بندر ترکمن
- The Impact of Regional Planning on Nutritional Outcomes: A Systematic Review
- Socialization in Aviation: The Art of Building Connections in the Skies
- The Integration of AI in Architecture and Construction: Trends, Challenges, and Opportunities
- ناپايداري شهر و عوامل موثر در اصفهان
- Interior architecture based on increasing the peace and comfort of residents with the help of environmental forces
- Dual Slant-Polarized Cross Dipole Antenna for TDD-LTE Networks