جستجو
Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
Alireza Mosusavi1 Neda Taqavi2 Mohsen Taghavijeloudar3
Abstract :
Wastewater treatment (WWT) through microbial fuel cell (MFC) has received great attention due to its simplicity and high efficiency. However, the relatively high operation cost of this approach limits its application for large scale. In this research, a novel technique of using cheap wood glue instead of expensive polymeric binders for anode fabrication was presented to make the application of MFC feasible for WWT. The reduction of chemical oxygen demand (COD) was monitored to evaluate the performance of the new designed MFC with wood glue (MFC-WG) in comparison with conventional anode martials for MFCs (such as carbon felt: MFC-CF and carbon cloth: MFC-CC). A brief economic analysis was conducted to study the feasibility of the new approach. According to the results, a COD removal of 66.7% was achieved in the case of MFC-WG which was less than MFC-CF (70.4%), but more than MFC-CC (63.2%). However, the economic analysis results revealed that using MFC-WG could significantly reduce the overall cost MFC operation: XX% and XX% less than MFC-CF and MFC-CC, respectively. As a result, the findings of this research suggest MFCs as promising alternative for WWT conventional methods at large scale.
Keywords : waste water treatment microbial fuel cell cod reduction wood glue
زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HFEBG
لینک مستقیم مقاله : https://isnac.ir/XEHE-HFEBG
سایر مقالات ارائه دهنده
- امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
- Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
- Qanat, a sustainable and environmentally friendly system for water resource management in arid area
- A novel approach for extraction of high value bio-products from microalgae using surfactants
- An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
- Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
- Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
- Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
- The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
- Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
- A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
- Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
- Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
- Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
- Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
- اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
- بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
- Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
- Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
- Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
- Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
- Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
- Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
- Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
- Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
- Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
- Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO