نمایش چکیده فارسی

Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate

Iman salimian rizi1 Hossein Ghazavi2

Abstract :
The Rubber-pad forming process is a versatile metal fabrication process used in commercial aerospace, automotive and military applications. This process is well suited for prototyping and production of small quantities of sheet metal parts. Different techniques of rubber-pad forming processes for sheet and tube forming are introduced and advantages and disadvantages of the process are discussed in detail. Rubber pad forming (RPF) is a metalworking process where sheet metal is pressed between a die and a rubber block, made of polyurethane. Under pressure, the rubber and sheet metal are driven into the die and conform to its shape, forming the part. The rubber pads can have a general-purpose shape, like a membrane. Alternatively, they can be machined in the shape of die or punch. Rubber pad forming has been used in production lines for many years. Up to 60% of all sheet metal parts in the aerospace industry are fabricated using this process. The most relevant applications are indeed in the aerospace field.[1] It is frequently used in prototyping shops and for the production of kitchenware. A three-dimensional finite element simulation, based on the rigid–plastic model for the analysis and design of rubber pad-forming process was developed. The hydraulic pressure force is applied to the normal direction of the blank work piece by integrating the pressure with respect to each element’s surface area. The predicted simulation results provide information on the actual design. This numerical approach to the rubber pad-forming process will be useful to the development and application for a wide range of automobile structural components. In this paper, 3D model of rubber pad-forming has been simulated by finite element method. Two damage model, coupled with von Mises plastic criterion, have been applied to predict where and when onset of ductile and shear rupture occurs. Also, 3D model of rubber pad-forming has been simulated to study the Deformation of blank, Distribution of stress contours, Contour of equivalent plastic strain in process. All studies presented in this paper have been carried out on aluminum alloy.

Keywords : rubber pad forming numerical investigation simulation fracture mechanics


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCFBC
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCFBC
نمایش چکیده فارسی : https://isnac.ir/SA/XEHE-HCFBC

سایر مقالات محل انتشار
  1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
  2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
  3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
  4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
  5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
  6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
  7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
  9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
  10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
  11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
  14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
  15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO