جستجو
Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
ROUHOLLAH MONTAZERIPOUR1
Abstract :
In this thesis, non-Newtonian nanofluid of CuO/(CMC+water) in volume percent of 0.5, 1, 1.5, 3, 4 has been simulated in a tube under constant heat flux using Fluent software. A combination of 0.5% (weight percent) of CMC (Chloro Methyl Cellulose) and water was used as base fluid that was non-Newtonian. At first, try to find the value of necessary properties for simulation such as viscosity, Thermal conductivity, specific heat capacity and density. At modeling step, the properties of non-Newtonian nanofluid of CuO/(CMC+water) in above volume percent were definite. Viscosity of nanofluid was function of shear rate and temperature and conduction coefficient was function of temperature intensively. Experimental quantitative values of viscosity and conduction coefficient of nanofluid were taken from previous papers, these two parameters had to be function zed before simulation in modeling software of sigma plot. The results of modeling were in good agreement with the experimental data. Density and specific heat capacity supposed to be constant in a volume percent. After modeling, laminar motion (600≤Re≤1500) of mentioned nanofluids were simulated in a tube under constant heat flux with uniform velocity at input of tube. Finally، study of important hydrodynamically parameters such as viscosity, shear rate and friction coefficient were investigated for different Reynolds numbers and different volume percent nanofluids.
Keywords : modeling simulation non newtonian nanofluid cmc (chloro methyl cellulose) cfd
زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCFBG
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCFBG
نمایش چکیده فارسی
: https://isnac.ir/SA/XEHE-HCFBG
سایر مقالات محل انتشار
- اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
- بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
- Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
- Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
- Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
- Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
- Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
- Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
- Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
- Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
- Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
- Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO