جستجو
Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO
ZAHRA FOROUTANFAR1
Abstract :
Mechanical and thermal properties of PVC softened with epoxidized soybean oil (PVC-EBSO) were studied. Repulsive interactions are used to explain the epoxidation effect of PVC modulus with EBSO and plasticizer. The glass transition temperature of PVC is a linear function of the epoxidation of the ESBO softener. The activation energy of stabilized PVC/ESBO is also affected by the dehydroro-chlorination reaction and HCL production process. Due to the addition of ESBO, the thermal behavior of PVC is improved. Higher activation energy of Ca-Zn and Ba-Zn stabilizers lead to greater stability in PVC-ESBO. The epoxidation level of ESBO also improves the mechanical properties and thermal stability of PVC.
Keywords : epoxidization glass transition temperature stabilizers activation energy
زبان مقاله : انگلیسی
محور مقاله : مهندسی شیمی
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCFCE
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCFCE
نمایش چکیده فارسی
: https://isnac.ir/SA/XEHE-HCFCE
سایر مقالات ارائه دهنده
- Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
- Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
- Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
- Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
- Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
- Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
- Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
- The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
- Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
- Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
- Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
- Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
- اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
- بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
- Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
- Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
- Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
- Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
- Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
- Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
- Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
- Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
- Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
- Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
- The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
- Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
- Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO