نمایش چکیده فارسی

Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads

ZAHRA FOROUTANFAR1

Abstract :
The Experimental studies show that the number of pressure cycles, cross-sectional pressure limits and average pressure applied to the PVC material in the transition phase are among the parameters that lead to fatigue in PVC pipes. Based on these studies, standards have been designed that provide the information needed to calculate the allowable number of pressure cycles on PVC pipes. The number of these allowable pressure cycles is reported to be less than the fatigue resistance limit of PVC pipes to ensure the safe use of PVC pipes. In the meantime, determining the number and range of temporary pressure cycles is a problem that should be obtained from the analysis of cross-sectional pressure results. The Institute of Plastic Pipes proposed the idea of using the PACE computer program to analyze fatigue failure in PE and PVC pipes, but the concept of transient stress intensity in the system is ignored in this program, so the results obtained in Most real systems are controversial. This research helps to improve the basic ideas of the PACE program. In order to analyze the fatigue, a hypothetical pumping system was built using the PACE program, as well as the analysis of different pump performance conditions. The results, which are somewhat predictable, show that fatigue analysis of PVC pipes is very important. Therefore, the concept intended by the PACE program is very simple. In addition, numerical results show that PVC pipes are reliable against fatigue failure in a wide operating range, and fatigue analysis of transient pressure data can also be reliable.

Keywords : pvc pipe fatigue cyclic load functional


زبان مقاله : انگلیسی
محور مقاله : مهندسی شیمی
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCFCA
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCFCA
نمایش چکیده فارسی : https://isnac.ir/SA/XEHE-HCFCA

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
  2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
  3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
  4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
  5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
  6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
  7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
  9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
  10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
  11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
  14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
  15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO