Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)

Amir Masoud Yaseri1 Mohsen Taghavijeloudar2

Abstract :
4-Chlorophenol (4-CP) as persistent organic pollutant (POP) is listed as one of the top toxic pollutants by the U.S. Environmental Protection Agency (USEPA). Generally, 4-CP has been found in the wastewater from different industrial effluents. Therefore, efficient removal of 4-CP from wastewater has become one of the main target for researchers in the area of environmental management. In this research, degradation of 4-CP through ozonation process was optimized using Response Surface Methodology (RSM). Reaction time, pH, 4-CP concentration and O3 flow rate were considered as main variables. The results revealed that reaction time and O3 flow rate have significant effect on 4-CP removal rate through ozonation process. In contrast, initial concentration of 4-CP and pH showed less effect of 4-CP removal. According to RSM model, optimum conditions was observed at time: 30 min, pH: 11, 4-CP concentration: 35 mg/L and ozonation flow rate: 5 g/h, which maximum 4-CP removal of 93.52% was achieved.

Keywords : 4 chlorophenol ozonation rsm optimization wastewater treatment


زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست و محیط زیست شهری
محل انتشار : دومین کنگره بین المللی مهندسی عمران ، معماری ، مصالح ساختمانی و محیط زیست
آدرس وب سایت کنفرانس : caucong.com/2nd
کد IOI مقاله : XEFB-HCKEA
لینک مستقیم مقاله : https://isnac.ir/XEFB-HCKEA

سایر مقالات ارائه دهنده
  1. امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
  2. Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
  3. Qanat, a sustainable and environmentally friendly system for water resource management in arid area
  4. A novel approach for extraction of high value bio-products from microalgae using surfactants
  5. An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
  6. Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
  7. Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
  8. Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
  9. The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
  10. Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
  11. A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
  12. Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
  13. Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
  14. Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
  15. Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
  1. زمینه‌گرایی به عنوان ابزاری برای تجدید حیات شهری در بافت فرسوده (نمونه موردی: بافت تاریخی شهر اردبیل)
  2. تحلیلی بر ساخت شهر پایدار با تاکید بر رویکردهای زیست محیطی
  3. اثر واکنش قلیایی سیلیسی کوتاه مدت سنگدانه های فعال در بتن با استفاده از درصد بهینه پوزولان ها
  4. دوام و مقاومت بالا در بتن سبک سازه ای خودتراکم با سرباره، میکروسیلیس و ماسه سبک پوزولانی
  5. اثر سیمان با درصد جایگزینی متفاوت خاکستربادی و میکروسیلیس در بتن سبک سازه ای خودتراکم با مقاومت و دوام بالا
  6. مطالعه اثربخشی معماری همساز با اقلیم بر سرزندگی سالمندان (مطالعه موردی مجتمع مسکونی سالمندان در شهر بهنمیر)
  7. استفاده از فن آوری جدید برای مقاوم سازی ساختمان ها در برابرزلزله
  8. بررسی تاثیر طراحی پارامتریک در سازه با الهام از طبیعت
  9. کاربرد هوش مصنوعی در ماشین های هوشمند
  10. تاثیر استفاده از فولاد نرم در قاب های مهاربندی کمانش تاب تحت زلزله های حوزه نزدیک گسل
  11. اثرات گرید فولاد بر رفتار لرزه‌ای قاب‌های مهاربندی همگرا (CBF) در ساختمان‌های بلند با استفاده از تحلیل استاتیکی غیرخطی
  12. بازشناسی نقش موثر عناصر هویت بخش معماری سنتی در طراحی خانه های ایرانی
  13. The effect of using Building Information Modeling(BIM) in Precast Concrete Structures
  14. سازه‌های فضاکار باز و بسته شونده با امکان اسکان موقت
  15. : اثر گرید فولاد بر رفتار غیرخطی تیر پیوند در مهاربندهای واگرایEBF در سیستم‌های دوگانه تحت زلزله‌های حوزه نزدیک