Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment

Bahman Nazari1 Mohsen Taghavijeloudar2

Abstract :
Pulp and paper industry is known as the third-largest consumer of water quantities, generating about 70-150 m3 wastewater per ton of paper produced. Membrane bioreactor (MBR) technology is one of the promising method for pulp and paper wastewater (PPWW) treatment. However, membrane fouling is remain as the main obstacle of the MBR process. In this research, the fouling mechanism during membrane bioreactor (MBR) was characterized using classical blocking models (Cake filtration, standard blocking, intermediate and complete blocking). To do this, the degree of membrane clogging at a constant flux of 1.5 LMH was studied by measuring the changes in trans-membrane pressure (TMP) increase using real industrial and synthesized wastewater. Based on the results, the pressure increased from 20 to 84 kPa and 10 to 31 kPa for real and synthesized wastewater respectively, during 30 days of treatment. The modelling simulation revealed that fouling mechanism matched with intermediate blocking model during the first stage and then followed by cake filtration mechanism and ended up with complete blocking mechanism. These results may be due to the presence of more organic matter and suspended solids in the industrial effluent, which increase the pressure by covering the surface of the membrane.

Keywords : pulp and paper membrane bioreactor fouling wastewater treatment


زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست
محل انتشار : چهارمین کنگره بین المللی مهندسی، فناوری و نوآوری
آدرس وب سایت کنفرانس : eticong.com/4th
کد IOI مقاله : XEEA-HACHA
لینک مستقیم مقاله : https://isnac.ir/XEEA-HACHA

سایر مقالات ارائه دهنده
  1. امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
  2. Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
  3. Qanat, a sustainable and environmentally friendly system for water resource management in arid area
  4. A novel approach for extraction of high value bio-products from microalgae using surfactants
  5. An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
  6. Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
  7. Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
  8. Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
  9. The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
  10. Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
  11. A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
  12. Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
  13. Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
  14. Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
  15. Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
  1. ساخت و ارزیابی خواص نانوالیاف الکتروریسی شده پلی یورتان و هیالورونیک اسید و ژل رویال در ترمیم زخم پوست
  2. بیوسنسورها(حسگرهای زیستی)
  3. بررسی و مقایسه ارایش قرار گیری پیچ های لاکینگ و نان لاکینگ بر روی نیل استخوان تیبیا
  4. متاورس انقلابی صنعتی در اینترنت
  5. چالش‌های فرهنگ سازمانی در مدیریت
  6. تبیین راهکار های شهرهوشمند بر پایدارسازی نظام درآمدی و تأمین منابع مالی شهرداری ها (نمونه مطالعاتی شهر قیامدشت)
  7. بررسی اثرات اپتیکی در میله مولد لیزر Nd:YAG
  8. نقش تحلیل اطلاعات اقلیمی توسط نرم افزارهای تخصصی در معماری پایدار(نمونه موردی شهر کوالالامپور)
  9. بررسی عناصر هویت بخش معماری از ديدگاه نظريه پردازان معاصر و تببین آن در مقایسه با ترجیحات مردمی
  10. A review of studies on floating breakwaters in Iran
  11. Numerical investigation of the maneuvering and seakeeping of a KVLCC2 using STAR-CCM+
  12. بررسی نقش و کاربرد اینترنت اشیا
  13. طراحی پیاده رو ها
  14. بررسی نقش پیاده رو ها در سرزندگی فضاهای عمومی
  15. presentation a new controller for wind turbine with the aim of improve the quantity and quality of production power and frequency control