Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
Bahman Nazari1 Mohsen Taghavijeloudar2
1) Faculty of Chemical Engineering, Babol University of Technology, 47148-71167, Babol, Iran
2) PhD of Environment Engineering, Department of Civil and Environmental Engineering, Seoul National University, 151‑744 Seoul, South Korea
IOI Code
:
XEEA-HACHA
Publication :
4th International Congress On Engineering, Technology and Innovation(eticong.com/4th)
Abstract :
Pulp and paper industry is known as the third-largest consumer of water quantities, generating about 70-150 m3 wastewater per ton of paper produced. Membrane bioreactor (MBR) technology is one of the promising method for pulp and paper wastewater (PPWW) treatment. However, membrane fouling is remain as the main obstacle of the MBR process. In this research, the fouling mechanism during membrane bioreactor (MBR) was characterized using classical blocking models (Cake filtration, standard blocking, intermediate and complete blocking). To do this, the degree of membrane clogging at a constant flux of 1.5 LMH was studied by measuring the changes in trans-membrane pressure (TMP) increase using real industrial and synthesized wastewater. Based on the results, the pressure increased from 20 to 84 kPa and 10 to 31 kPa for real and synthesized wastewater respectively, during 30 days of treatment. The modelling simulation revealed that fouling mechanism matched with intermediate blocking model during the first stage and then followed by cake filtration mechanism and ended up with complete blocking mechanism. These results may be due to the presence of more organic matter and suspended solids in the industrial effluent, which increase the pressure by covering the surface of the membrane.
Keywords : pulp and paper membrane bioreactor fouling wastewater treatment