Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity

Keyhan Divsalar1 Mohsen Taghavijeloudar2

Abstract :
High value bio-products extraction from microalge has received great attention as a sustainable alternative for traditional source of energy. However, bio-products extraction from microalge is highly depends on culture conditions such as temperature and light intensity. In this research, the effect of different temperature and light intensity on microalge growth rate and high value bio-product extraction of carbohydrate, protein and lipid was investigated. S. Platensis and Zarrouk were used as microalge and culture medium, respectively. According to the results, maximum biomass concentration of 1.6 g/L was achieved under 35 °C temperature and 3000 lux light intensity. Regarding bio-product extraction, maximum concentration of 19, 54 and 25 %MDW of carbohydrate, protein and lipid were recorded under optimal condition of light intensity (3000 Lux) and temperature (35 °C), respectively. The findings of this research proved that microalge biomass cultivation under an appropriate condition can be considered as a promising approach for high value bio-product production such as carbohydrate, protein and lipid.

Keywords : microalage bio products lipid protein carbohydrate optimization


زبان مقاله : انگلیسی
محور مقاله : مهندسی محیط زیست
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HFEHG
لینک مستقیم مقاله : https://isnac.ir/XEHE-HFEHG

سایر مقالات ارائه دهنده
  1. امکان سنجی استفاده از آب باران به عنوان یک منبع آب تجدید پذیر با استفاده از نقشه های هوایی Google Earth و داده های هواشناسی (مطالعه موردی: شهر تهران)
  2. Municipal wastewater treatment through cultivation of a new strain of microalgae Chlorella sorokiniana pa.91 in flat plate photobioreactor (FP-PBR
  3. Qanat, a sustainable and environmentally friendly system for water resource management in arid area
  4. A novel approach for extraction of high value bio-products from microalgae using surfactants
  5. An investigation on the potential of rainwater harvesting from building’s roof tops in Seoul city, South Korea
  6. Performance evaluation of membrane bioreactor (MBR) for pulp and paper wastewater treatment
  7. Using Ferric chloride (FeCl3) as trace-element to enhance methane production of anaerobic co-digestion
  8. Characterization of fouling mechanism during membrane bio-reactor (MBR) process for industrial wastewater treatment
  9. The therapeutical potency of cyanobacterial secondary metabolites compared with chemotherapy against leukemia: Mini-review
  10. Optimization of 4-chlorophenol degradation through ozonation process: Response Surface Methodology (RSM)
  11. A sustainable and environmentally friendly approach for wastewater treatment using natural flocculants: pH effect and optimization
  12. Smart design of a sustainable building with zero water demand: Rainwater harvesting, in situ water and wastewater treatment
  13. Improvement of microalgal-based biological treatment of municipal wastewater by adding ZnCl2 and FeCl2 as trace elements
  14. Sustainable approach for wastewater treatment through microbial fuel cell (MFC): Using wood glue instead of expensive polymeric binders
  15. Optimization of high-value bio-product extraction from microalgae biomass: Effect of temperature and light intensity
سایر مقالات محل انتشار
  1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
  2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
  3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
  4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
  5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
  6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
  7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
  8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
  9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
  10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
  11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
  14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
  15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO