Assessment of Unbraced Length Impact on Flange Local Bending Capacity of Steel Members
Assessment of Unbraced Length Impact on Flange Local Bending Capacity of Steel Members
Nima Fakhar Hasani1 Yousef Hosseinzadeh2
1) Ph.D. Student in Civil Engineering, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran
2) Professor, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran
IOI Code
:
ABGG-ACZZDG
Publication :
11th.International Conference on Researches in Science & Engineering & 8th.International Congress on Civil, Architecture and Urbanism in Asia(11icrsie.ir)
Abstract :
The transfer of concentrated tensile loads to the flanges of steel sections can cause local bending and structural connection failures. To better understand this phenomenon, this paper investigates the effect of the unbraced length of steel members on the local capacity of sections subjected to single tension loading. First, a finite element model was developed to evaluate the behavior of steel sections under concentrated tensile loads, and its accuracy was validated against experimental data. Subsequently, the behavior of 16 specimens based on two IPE and two IPB section types was analyzed under concentrated tensile loading. The finite element analysis results for steel sections with different unbraced lengths under single tension were compared. The findings revealed that the local capacity of steel sections decreases by 3% to 17% as the unbraced length increases. Furthermore, the equation provided by the AISC 360-22 specification for the flange local bending limit state was found to be conservative, predicting between 38% and 66% of the actual capacity of the steel profiles.
Keywords : unbraced length flange local bending local instability single tension finite element model