Evaluation of Resistance Coefficient for Non-Composite Retention Component in Concrete by Shake Table Test Experiments

Evaluation of Resistance Coefficient for Non-Composite Retention Component in Concrete by Shake Table Test Experiments

Yousef BahramBeigi1

1) Master of Civil Engineering Structural Orientation - Super Panel Company

IOI Code : XBDG-ECBFD
Publication : The 6th national Congress On Civil Engineering, Architecture & Urban Development(6icsau.ir)
Abstract :
    In ACI 318-11 and ASCE / SEI 7-10 standards an additional coefficient of resistance of 0 is defined for the seismic design of non-structural building block components in concrete. Although these standards apply a similar mechanism to the coefficient of resistance for building structures, the logic used for retention is fundamentally different. The main purpose of this coefficient is two-fold: to encourage the use of formable retainer systems - as defined in ACI 318 standard clauses - that apply penalties to non-formable harnesses and, on the other hand, to increase the forces of non-formable harness design . To show more load balancing scheme. In formable systems, a value of =0 = 1 is used, such that in non-formable systems the values ​​0 = 2.5 and =0 = 1.5 are assigned based on Rp values ​​greater than or less than 2. These values ​​are in conjunction with the proposed relation for Rp component values ​​that have not been expressed in vitro. Research on this at SDSU has been ongoing since 2011 to determine this additional coefficient of resistance, which includes two years of full-scale dynamic structural testing using an ideal non-structural component and several different types of shaking table controls. This article provides a summary of the structural experiment performed with the aim of appropriate 0 values ​​as well as a discussion of ductility as applied to the overburden in the restraint systems.

Keywords : concrete retention required containment non structural components