Study and study of adhesion strength between polypropylene fiber concrete With a non-tangled steel rebar with three diameters under Pull-out test

Study and study of adhesion strength between polypropylene fiber concrete With a non-tangled steel rebar with three diameters under Pull-out test

Seyedmohammad Mousavikhatir1 Mohsen Notarash2

1) Sama technical and vocational training college , Islamic Azad University , Babol Branch , Babol , Iran Senior Lecturer structure, Civil Engineer Email:
2) Civil engineer of the municipality Fereydounekenar, Civil Engineer

IOI Code : XBFA-DFHGC
Publication : 3rd International Conference on Applied Research in Structural Engineering and Construction Management(sharifsecm.ir)
Abstract :
    The study of the adhesion between the surface of the joists and concrete is a time when concrete labs have opened a path for further investigation by researchers. Polypropylene fibers are used as an additive for the purpose of arming all types of concrete and cement and gypsum mixtures. The use of polypropylene fibers increases the flexural strength, tensile strength, shear and abrasion in fiber concrete. In this experiment, a Bond Strength laboratory test was conducted considering the interaction between the non-tangential steel fitting with different diameters and polypropylene fiber concrete, which was tested by pulling out 8, 10 and 12 mm of 6 cylindrical cylinders E 300 × 150 mm in the laboratory. Two specimens were made in each diameter and after 28 days of treatment, a rebound test was performed. The results showed that the adhesion strength of non-tangled steel reinforced steel meshes and polypropylene fiber reinforced concrete is less than the adhesion strength of reinforced steel rod with ordinary concrete. Also, by increasing the diameter of the rebar, the adhesion strength between the polypropylene fiber reinforced concrete and the non-tangled steel rod is reduced by 0.26%.

Keywords : exhaust polypropylene fiber concrete non tang steel rebar adhesion strength interaction