Evaluation and evaluation of divergent bracing in steel structures
Evaluation and evaluation of divergent bracing in steel structures
negar arab baseri1 vahid saberi2 hamid saberi3
1) Student Master of Science in Earthquake Engineering,eyvanakey University, Semnan, Iran,
2) Assistant Professor, Department of Civil Engineering, University of eyvanakey , Semnan, Iran,
3) Assistant Professor, Department of Civil Engineering, eyvanakey University, Semnan, Iran,
IOI Code
:
XBFB-DFBBF
Publication :
International Congress On Engineering, Technology and Innovation(eticong.com/1st)
Abstract :
Divergent braces have a very good energy absorption capability, as well as good formability and stiffness, while at the same time using them in structures with special delicacies, so that the lack of proper design and implementation of specific points of the credit system easily distorts. Unfortunately, in our country, the design and implementation of such systems is not based on certain criteria, and as a result, the retrofitting of many of these sources will result. In the cranking system, the axial design of the beams in the camshafts, as well as other conventional beams and gravity loads And in the combination of earthquake load no significant force is generated in these beams, but in the extruded system, in addition to the cutting and loading anchors of gravity loads, in the combination of earthquake load and due to the axial forces created in the braces, an anchor line and extra cutting in this The beams are created and the critical mass of the earthquake load is designed to design this dark It becomes. Usually, the critical location in these beams is the connecting bracket to the beam, and in this place there is generally a need for a reinforcement plate up and down. According to the seismic design philosophy, it is expected that vibrational bracing systems under severe earthquakes will be able to exhibit a sustained and sustained nonresponse Give In this type of frames, the braces of the link must have a compressive section of the seismic. In the beam, any sudden changes in the wing and cross section must be avoided. Also, it is not allowed to do any kind of patching on the parts of the link beam during it.
Keywords : evaluation divergent bracing intermediate structures steel structures