Title: Transfer heat transfer in marine engine condensers (case study mtu)

Title: Transfer heat transfer in marine engine condensers (case study mtu)

ALI MOARECHIPOUR1

1) Mechanical expert of the General Administration of Ports and Maritime Affairs of Khuzestan Province

IOI Code : XCBC-EKAFA
Publication : 3 rd Conference on Mechanical, Electrical and Computer Engineering (mecconf.com/2nd)
Abstract :
    Increasing heat transfer due to the importance of Riyadh in the design of compact heat exchangers and in various industries, especially refrigerators, machines and petrochemical processes has been an important issue in recent decades. Heat transfer enhancement methods are divided into active and passive categories. The active method requires an external source, but the passive method does not need it and for this reason has been considered by many researchers. In most engineering and management applications, the use of heating systems requires higher efficiency and effectiveness. Thus, several methods with high costs to increase heat transfer have been investigated so far. By examining and optimizing technical variables, as well as by emphasizing the increase of levels in heat exchangers, efficiency can be increased. In general, the increase in heat transfer can be divided into one or a combination of states, breaking the boundary layer and increasing the turbulence of the flow, increasing the levels of heat transfer, creating rotation or sub-flows. In addition, improving heat transfer performance, especially in plate or tube heat exchangers, can be achieved by deforming the channel wall used. Inside the helical coils and helical tubes, a force is applied to N due to rotational and axial motion. This causes the radial acceleration of the fluid to be zero and the fluid to circulate along the center line of the pipe at the same time as it travels along the pipe. Therefore, the centrifugal force has the greatest effect on the flow regime and causes the fluid flow to circulate. Therefore, research has been done in this field.

Keywords : heat exchangers nusselt number reynolds number heat transfer friction coefficient