Investigation of compaction and load-bearing effect of clay soils using magnetic water

Investigation of compaction and load-bearing effect of clay soils using magnetic water

GHOLAMREZA TADAYONFAR1

1) Faculty member of the Department of Civil Engineering, Hakim Sabzevari University

IOI Code : XDHH-GGZFG
Publication : 5th.International Conference & 6th.National Conference on Civil Engineering, Architecture, Art and Urban Design(5iccacs.ir)
Abstract :
    Abstract The main reason for hypothesizing water quality in fine-grained soil compaction is the use of drinking water in the laboratory to provide the optimum moisture content to maximize compaction. In practice, however, different water is used for this purpose. Some of the types of water used by the contractor are: salt water, spring water, muddy water, calcareous water, gypsum water, etc. However, by repeating rolling or using stronger rollers, an attempt is made to compensate for the shortcomings and increase the specific gravity of the soil; However, the cost is not so low that it can be easily avoided. Therefore, the studies focused on waters with different characteristics (Sabzevar drinking water, magnetic water); Geotechnical and mechanical properties on the samples, including etherberg limits, projector density and uniaxial compressive strength were investigated. By performing experiments with magnetic water, it caused a change in the function of soil ions and a significant increase in soil adhesion and bearing capacity compared to experiments with ordinary water. The use of magnetic water reduced the optimum moisture content of the clay by 3%. Meanwhile, the maximum mean dry specific gravity of the samples increased by approximately 5%. By comparing the compressive strength of conventional and magnetic samples, it is concluded that the use of magnetic water significantly increases the tolerable axial force for the samples by about 37.5%.

Keywords : compressibility uniaxial compressive strength magnetic water clay