Effect of different factors on wetting front of surface drip irrigation and simulation by model HYDRUS-2D

Effect of different factors on wetting front of surface drip irrigation and simulation by model HYDRUS-2D

zeinab heydari1 masumeh farasati2

1) Iran, Razi univercity of kermanshah Email:
2) Iran, Razi univercity of kermanshah Email:

IOI Code : XYBK-AAAGC
Publication : International Conference on Sustainable Development With a focus on Agriculture, Environment and Tourism(icdat.ir)
Abstract :
    In order to maximize utilization and increase the efficiency of drip irrigation systems, we need to know are true and accurate design of these systems. Because of the costly and time consuming to field and laboratory studies should take advantage of the numerical models or empirical models. One of these models is numerical model HYDRUS-2D that have ability to simulate movement of water, minerals and warm at the soil. In this study, the moisture distribution in the different conditions and the ability to simulate water movement in soil under different conditions was measured by HYDRUS-2D. Tests In a Plexiglass box and on the slopes of 0, 5, 15 and 25 percent, irrigation times 2, 4, 6, and 8 hours and discharge 2, 4, 6 and 8 liters per hour was performed in the hydraulic laboratory Razi University in Kermanshah. After measuring the width and depth of wetting front in the laboratory, were compared results it with the results of the simulation. The results showed that in all slopes, discharges and, irrigation times the correlation coefficient was above 85 percent. The amount RMSE was for the maximum depth and width of wet, respectively at different slopes between 0.89-2.17 and 0.42-1.85, for different discharges between 0.89-1.57 and 0.42-6.27 and at different times between 0.75-1.54 and 0.42-3.36 which shows HYDRUS-2D model have high accuracy at simulation wetting front , at various times, discharges and slopes. The results also showed that by increasing irrigation times, wetting front gets wider, this trend is descending. By increasing the slope, the wetting front has ovoid And downstream into drawn. And by increasing the discharge, the wetting front will be wider and superficial.

Keywords : surface drip irrigation water pattern slopes irrigation times discharge hydrus 2d