Surface Modification of Polypropylene Non-Woven Fabrics by Plasma for drug delivery

Surface Modification of Polypropylene Non-Woven Fabrics by Plasma for drug delivery

alireza zare1 leila mivehi2 mojtaba akbari dogolsar3

1) iran university of guilan
2) iran university of guilan
3) iran university of guilan

IOI Code : XYCC-ACZBE
Publication : International Conference on Science and Engineering(icesconf.com)
Abstract :
    A conventional method used for imparting the desired permanent hydrophilicity is chemical graft polymerization requiring the use of organic solvents and a catalyst [1,2], however, in this project an environmentally alternative to the use of organic solvents which is plasma surface activation of polypropylene non-woven fabrics were used. To finding the optimum condition, three different factors which are the type of gas (Argone, Oxygen and Nitrogen), pressure (1, 2 ,4 Torr) and the time of reactions (30, 60 , 90¬ , 120 ,150 , 180 sec) were changed. Contact angle, water absorption and the strength loss of treated samples were measured and the optimum condition of the plasma surface modification were choosed (Argon gas, 2 torr pressure and 90 seconds). Then treated samples in optimum condition of plasma modification were grafted by Glycidil methacrylate aqueous solution in different concentrations (10, ¬20, ¬30, 40 v/v ). The effect of monomer concentration on the grafting yeild was investigated. The selected volume concentration of the monomer was 30% as the optimum which showed the maximum grafting yeild. The functional groups and surface properties of the treated samples by plasma and the grafted samples were investigated by fourier transform infrared (FTIR) and scaning electron microscopy (SEM). The FTIR spectra showed that functional groups consisting oxygen such as O-C=O، C=O and C-O established in plasma treated fabrics. Also, SEM images exibited the creation of activated sites and fuctional groups that are related to the plasma gas and grafting reaction [3]. SEM images also showed that the connection between polymer and the surface of the fiber was successfully made.

Keywords : plasma surface modification grafting polypropylene