Analysis of Axial, Shear and Bending Forces on Pedestrian Truss Bridges and Evaluation of Modal Analysis and Their Displacement

Analysis of Axial, Shear and Bending Forces on Pedestrian Truss Bridges and Evaluation of Modal Analysis and Their Displacement

Ramin Rafiezadeh1

1) 1. Department of civil engineering, Faculty of advanced study, Islamic Azad university of Bushehr branch, Bushehr, Iran

IOI Code : XGAD-KZZZD
Publication : First international Conference on applied researches in civil engineering, architecture and urban planning (icarcau.com/1st)
Abstract :
    In recent years, the use of pedestrian bridges has increased significantly due to the increasing traffic load and the consequent increase in the width of roads and streets. Therefore, it is important to identify the most suitable design according to the practical conditions. We know that in addition to the dead load, unexpected loads are applied to the structure of a pedestrian bridge during the operation period, such as earthquake load, advertisement boards and finally the additional load caused by accidents of various types of vehicles, which should be considered in order to reduce the damage and optimize the design of this type. structures, more attention should be paid. In this research, the structural systems of these types of bridges have been evaluated so that the most suitable system can be identified and used according to the type of load applied to the bridge structure. In this research, a metal pedestrian bridge (truss bridge) has been examined using SAP 2000 software. The general results showed that the structural systems of conventional pedestrian bridges have sufficient capacity against static and dynamic loads. In the truss system with the same loading, the total weight of the bridge and the cost of building the bridge are minimal. If the necessary stiffness is provided and the design is optimal so that the natural frequency of the structure is not in the range of 0.25 to 1 Hz, the resistance of truss systems is not lower than other structural systems. In this research, shear forces, modal analysis, incoming anchors and other design parameters have been investigated.

Keywords : pedestrian bridges truss bridge modal analysis bending anchors shear force