نمایش چکیده فارسی

Analysis of Axial, Shear and Bending Forces on Pedestrian Truss Bridges and Evaluation of Modal Analysis and Their Displacement

Ramin Rafiezadeh1

Abstract :
In recent years, the use of pedestrian bridges has increased significantly due to the increasing traffic load and the consequent increase in the width of roads and streets. Therefore, it is important to identify the most suitable design according to the practical conditions. We know that in addition to the dead load, unexpected loads are applied to the structure of a pedestrian bridge during the operation period, such as earthquake load, advertisement boards and finally the additional load caused by accidents of various types of vehicles, which should be considered in order to reduce the damage and optimize the design of this type. structures, more attention should be paid. In this research, the structural systems of these types of bridges have been evaluated so that the most suitable system can be identified and used according to the type of load applied to the bridge structure. In this research, a metal pedestrian bridge (truss bridge) has been examined using SAP 2000 software. The general results showed that the structural systems of conventional pedestrian bridges have sufficient capacity against static and dynamic loads. In the truss system with the same loading, the total weight of the bridge and the cost of building the bridge are minimal. If the necessary stiffness is provided and the design is optimal so that the natural frequency of the structure is not in the range of 0.25 to 1 Hz, the resistance of truss systems is not lower than other structural systems. In this research, shear forces, modal analysis, incoming anchors and other design parameters have been investigated.

Keywords : pedestrian bridges truss bridge modal analysis bending anchors shear force


زبان مقاله : انگلیسی
محور مقاله : مهندسی عمران و توسعه پایدار
محل انتشار : اولین کنفرانس بین المللی تحقیقات پیشرفته در مهندسی عمران، معماری و شهرسازی
آدرس وب سایت کنفرانس : icarcau.com/1st
کد IOI مقاله : XGAD-KZZZD
لینک مستقیم مقاله : https://isnac.ir/XGAD-KZZZD
نمایش چکیده فارسی : https://isnac.ir/SA/XGAD-KZZZD

سایر مقالات ارائه دهنده
  1. Simulation, Analysis and Investigation of Crack Behind the Timing Belt of Pride and XU7 With XFEM technique Using Finite Element of ABAQUS software
  2. Simulation, Analysis and Investigation of Shear Walls of Reinforced Concrete Under Seismic Load With ABAQUS Software Using Finite Elements Method
  3. Simulation and Analysis of Cracks Growth Mechanism and Propagation in Steel Shear Wall
  4. Evaluation of Compatibility of Architectural Model and Physical Planning of Iranian Cities with Features of Iranian - Islamic Architecture
  5. Numerical Analysis and Simulation Concrete Water Tanks Under Seismic Load Using ABAQUS Finite Element
  6. Finite Element Analysis of Steel Shear Wall Reinforced With CFRP Composite
  7. Simulation of Progressive Destruction In Concrete Buildings By Using Finite Element Of ABAQUS
  8. The Effect of Unbalanced Magnetron Spattering on Mechanical Properties and Strength of Titanium Nitrate and Tin Dioxide Thin Films
  9. Simulation and Analysis of Cylindrical and Spherical Pressure Vessel
  10. Simulation of Three-Roller Pipe Bending Process Using ABAQUS Finite Element Method
  11. Analysis of In-Cylinder Fluid Based on Navier-Stokes Equations
  12. Analysis Based on Newton-Raphson Equations and Compare With Results of ANSYS Software in Hydraulic Cylinder
  13. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
  14. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
  15. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
سایر مقالات محل انتشار
  1. بررسی رابطه آماری میزان آگاهی شهروندان از وضعیت مدیریت شهری با آگاهی از حقوق شهروندی(مطالعه موردی :شهر سرابله)
  2. بررسی ساختار معماری و تزئینات خارجی در خانه قدیمی تبریز( مطالعه موردی خانه لاله‌ای )
  3. تحلیل طراحی در متاورس با محوریت هستی شناسی شئ‌محور
  4. تاثیرات حمل و نقل دریایی بر توسعه اقتصادی استان خوزستان
  5. مروری بر سیر تحول دیدگاه های برنامه ریزی کاربری زمین شهری با واکاوی چالش های دیدگاه توسعه پایدار
  6. بررسی معماری و جزئیات کارکرد کبوترخانه‌ها و چگونگی احیاء آن‌ها
  7. پدیدارشناسی، گذرگاهی ادراکی برای رسیدن به تجربه فضایی در معماری
  8. نقش برنامه‌ریزی مشارکتی بر توسعه جوامع محلی
  9. تاثیر رایانه بر خلاقیت طراح در فرآیند طراحی معماری
  10. برندسازی در طراحی منظر
  11. A multidisciplinary practice of urban agriculture in Rasht, Iran
  12. تبیین ویژگی های محیطی موسیقی درمانی در فضای باز
  13. کاربردهای معمارانه بتن شفاف
  14. اهمیت توجه به نور طبیعی در فضاهای آموزشی با تاکید برپایداری
  15. ارتقاء کیفیت محیط زیست شهری با ایجاد بام سبز و رویکرد معماری و شهرسازی ایرانی اسلامی