Development of a New Multi-Generation System Based on Absorption Heat Transformer Cycle
Development of a New Multi-Generation System Based on Absorption Heat Transformer Cycle
Seyyed Amirreza Abdollahi1 Seyyed Faramarz Ranjbar2 Moharram Jafari3 Faramarz Talati4 Sana Sahafamin5
1) Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran,
2) Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran,
3) Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran,
4) Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran,
5) Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran,
IOI Code
:
XHBE-KAEEK
Publication :
5th. International Congress On Engineering, Technology and Innovation(eticong.com)
Abstract :
Since low-temperature heat sources lose a tremendous amount of heat, recycling this heat can significantly reduce energy costs; therefore, this article explores pairing an absorption cycle with a low-temperature source to reuse waste heat and convert it into a high-temperature source. Geothermal energy is an accessible energy source on our planet that is not dependent on climatic conditions, making it suitable for providing the necessary energy for the cycle; this research proposes two separate systems, System No.1 and System No.2.
System No.1 comprises a geothermal, absorption, and ejector refrigeration cycle, while System No.2 is identical to System No.1 but incorporates a water treatment system. Energy, exergy, and thermo-economic studies on these proposed cycles indicate that System No.1 can generate a net power of 565.1 kW and a refrigeration capacity of 1604 kW, with thermal, exergy, and capital production costs amounting to 29.06%, 31.67%, and $8.02/GJ, respectively; Additionally, the results reveal that the ejector has the highest exergy destruction rate, suggesting a need for improvement.
On the other hand, System No.2 can produce a net power of 1138 kW, a refrigeration capacity of 530.7 kW, and 0.2731 kg/s of fresh water; this system s thermal, exergy, and capital production costs are 31.48%, 54.77%, and $22.08/GJ, respectively; the findings also highlight that the expansion valve in this cycle exhibits the highest exergy destruction rate.
Overall, these results emphasize the potential for utilizing waste heat in low-temperature sources through the proposed absorption cycles while also identifying areas for improvement, such as the ejector in System No.1 and the expansion valve in System No.2
Keywords : multi generation absorption cycle water treatment system geothermal cycle ejector low temperature source thermo economic study