نمایش چکیده فارسی

Development of a New Multi-Generation System Based on Absorption Heat Transformer Cycle

Seyyed Amirreza Abdollahi1 Seyyed Faramarz Ranjbar2 Moharram Jafari3 Faramarz Talati4 Sana Sahafamin5

Abstract :
Since low-temperature heat sources lose a tremendous amount of heat, recycling this heat can significantly reduce energy costs; therefore, this article explores pairing an absorption cycle with a low-temperature source to reuse waste heat and convert it into a high-temperature source. Geothermal energy is an accessible energy source on our planet that is not dependent on climatic conditions, making it suitable for providing the necessary energy for the cycle; this research proposes two separate systems, System No.1 and System No.2. System No.1 comprises a geothermal, absorption, and ejector refrigeration cycle, while System No.2 is identical to System No.1 but incorporates a water treatment system. Energy, exergy, and thermo-economic studies on these proposed cycles indicate that System No.1 can generate a net power of 565.1 kW and a refrigeration capacity of 1604 kW, with thermal, exergy, and capital production costs amounting to 29.06%, 31.67%, and $8.02/GJ, respectively; Additionally, the results reveal that the ejector has the highest exergy destruction rate, suggesting a need for improvement. On the other hand, System No.2 can produce a net power of 1138 kW, a refrigeration capacity of 530.7 kW, and 0.2731 kg/s of fresh water; this system s thermal, exergy, and capital production costs are 31.48%, 54.77%, and $22.08/GJ, respectively; the findings also highlight that the expansion valve in this cycle exhibits the highest exergy destruction rate. Overall, these results emphasize the potential for utilizing waste heat in low-temperature sources through the proposed absorption cycles while also identifying areas for improvement, such as the ejector in System No.1 and the expansion valve in System No.2

Keywords : multi generation absorption cycle water treatment system geothermal cycle ejector low temperature source thermo economic study


زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : پنجمین کنگره بین المللی مهندسی، فناوری و نوآوری
آدرس وب سایت کنفرانس : eticong.com
کد IOI مقاله : XHBE-KAEEK
لینک مستقیم مقاله : https://isnac.ir/XHBE-KAEEK
نمایش چکیده فارسی : https://isnac.ir/SA/XHBE-KAEEK

سایر مقالات محل انتشار
  1. تاثیر آموزش بازی محور در محیط یادگیری سیار بر عملکرد ریاضی دانش آموزان دارای اختلال یادگیری
  2. بررسی مقاومت فشاری و نفوذ پذیری در بتن های خودمتراکم بدون رنگ پلی اورتان و نقش پوشش محافظ در مقابل سولفات ها
  3. ورزش های زورخانه ای ؛ حقیقت فراموش شده
  4. The role of two-shell facades in the visual privacy of traditional architecture (physical model of Mashrabiya)
  5. گونه شناسی معماری بومی محلی با معرفی سیاه چادر عشایری
  6. Analysis on low temperature synthesis of nano alpha alumina powder with two-step hydrolysis
  7. شناسایی و اولویت بندی شاخص های استعدادیابی والیبال ایران
  8. واکاوی عوامل مؤثر بر بهبود امنیت اجتماعی زنان در بافت¬های ناکارآمد شهری (مورد پژوهی: محله گلشهر شهر مشهد)
  9. Effect of Fibers on Compressive Strength of Specific Concrete (Case study: Soil-Cement)
  10. Effect of Fibers on Compaction of Specific Concrete (Case study: Soil-Cement)
  11. بررسی میزان فراوانی ژن های qnr A,qnrB,qnrS در ایزوله های کلبسیلا پنومونیه مقاوم به سیپروفلوکساسین جدا شده از عفونت ادراری
  12. Green Communication and energy efficient Wireless Body Area Networks routing protocol
  13. Routing in body sensor networks based on fuzzy logics on the IOT platform in critical cases
  14. A Study On Limit State Method For Factor Of Safety Calculation In Bridge Management Systems
  15. A study and analysis on the synthesis of mud and dendritic plastic nanostructures with excellent catalytic activities on the thermal decomposition of ammonium perchlorate