جستجو
Thermodynamic analyses of near zero CO2 emission oxy-fuel power plant with atmospheric condensation unit
Seyyed Amirreza Abdollahi1 Seyyed Faramarz Ranjbar2
Abstract :
Thermodynamic analyses of methane fired oxy-fuel power plant, using energy and exergy approaches, are reported for a proposed configuration. Oxy-fuel cycles proposed for removing carbon dioxide (CO2) by producing a flue gas which is mainly CO2 and steam. This flue gas mixture makes low temperature physical separation a promising technology for CO2 capture. Advantages of proposed configuration are the subterfuge of the difficult condenser for the working fluid at vacuum pressure and the saving of the relatively large CO2 compressors needed for compression to atmosphere. Instead of using a standard condenser, an additional condensation/re-vaporization unit is needed. This condensation/revaporization unit works at atmospheric conditions. Results show that the thermal and exergy efficiencies increase up to 53.25 and 46.45 respectively by adding of condensation/re-vaporization unit and using the waste energies. Also the percentage of vapor in HTT outlet flow is an important parameter that influences the efficiency of the cycle.
Keywords : oxy fuel condensation/revaporization exergy economizer superheater pinch point
زبان مقاله : انگلیسی
محور مقاله : مهندسی مکانیک
محل انتشار : سومین کنفرانس بین المللی پیشرفت های اخیر در مهندسی، نوآوری و تکنولوژی - بلژیک
آدرس وب سایت کنفرانس : eitconf.com/3rd
کد IOI مقاله : XKBA-AZDZDH
لینک مستقیم مقاله : https://isnac.ir/XKBA-AZDZDH
نمایش چکیده فارسی
: https://isnac.ir/SA/XKBA-AZDZDH
سایر مقالات ارائه دهنده
- طراحی شاتون برای موتور احتراق داخلی
- Ackerman steering mechanism design for front axle steering vehicles
- CFD Simulation of Flow in a Centrifugal Pump
- Analysis of the Bus Chassis with Finite Element Method through MATLAB and Abaqus Software
- Development of a New Multi-Generation System Based on Absorption Heat Transformer Cycle
- Title of Numerical Analysis of Aquatic Creature movement in water
- Design and optimization of a multigeneration energy system for generating power, heating, cooling and fresh water as demands of a residential scheme
- Simulation of the impact of adding airfoils to wind turbines on output power
- Evaluation of CCHP system with CO2 working fluid in hot weather conditions
- Optimization of refrigeration process in a cold storage using ANSYS Fluent Simulation
- Numerical Modeling of Forced Convection in Electrical Heater
- Thermodynamic analyses of near zero CO2 emission oxy-fuel power plant with atmospheric condensation unit
- Innovative Computational Modeling of Airflow in Ultrasonic Nozzles
سایر مقالات محل انتشار
- خوشه بندی تصاویر رادار سار با استفاده از شبکههای عصبی مصنوعی
- Simulation, Analysis and Investigation of Friction, Mechanical properties and the Role of Plunger on Thickness Distribution in Hydro-Forming Process
- Polymeric Nanoparticles in Cancer Therapy: Drug Delivery through Controlled and Targeted Release- A Review
- Renewable Materials in Green Construction: The Role of Hempcrete and Other Sustainable Building Practices
- استفاده از انرژی خورشیدی در باززندهسازی بناهای تاریخی
- ارزیابی مسائل زیست محیطی در خصوص آودگی آب در جهت توسعه شهری
- بررسی نکات طراحی و ساخت برج Kingdom در کشور عربستان
- Exploring the Impact of Urban Management on Achieving Sustainable Urban Development
- The risk of pollutants and their impact on the environment - a review
- بررسی انواع بتن کاربردی
- نقد تدریس زبان انگلیسی در آموزش عالی و چگونگی بهبود تدریس زبان به کمک روش های نوین
- ارزیابی علل روانگرایی خاک و عوامل تشدید کننده آن
- Intelligent Energy Management Analysis for Thermal Comfort in Commercial Complexes
- کاربرد هوش مصنوعی در دینامیک سیالات محاسباتی بهینهسازی و پیشبینی عملکرد جریانهای سیال
- Waste management in drilling operation