نمایش چکیده فارسی

High step-down converter using coupled inductor with zero voltage switching

farshad khalafian1

Abstract :
The lack of fossil fuels and environmental problems have led to the attention of receiving green energy and the use of renewable energy sources such as photovoltaic (PV) systems, fuel cells and wind turbines. In order to benefit from these renewable sources, non-isolated DC-DC converters with high reduction are used in many industrial applications, especially photovoltaic renewable sources. If a voltage different from the battery voltage (DC link) is needed, another converter is used to produce the required voltage. This structure is used in various applications such as mobile charging stations, street lighting LEDs, etc. As a result, the first converter acts as an interface circuit between the PV and DC link by increasing the voltage level of the PV panel. On the other hand, the second converter is used to reduce the voltage level of the DC link and feed certain loads. In general, it is very important to achieve a suitable step-down converter with high efficiency that enables the achievement of low voltage, so far many researchers have studied on this topic. In this article, in order to improve the important parameters in such converters, an attempt is made to present a step-down converter using a coupled inductor with zero voltage switching, which has these characteristics. In order to check the presented circuit, the simulation was done in Orcad software, the results of the simulation, which is the voltage and current characteristics of the circuit, were drawn and analyzed for different elements of the circuit. As the results showed, the proposed converter has several basic advantages, such as no overshoot in the transient state and fast response in the output, and the voltage and current components of the output also have a very low fluctuation and distortion compared to the average value of the signal, and this value is less than 5 2% of the average voltage and nominal current in which the circuit is designed.

Keywords : converter step up reducer switching zero voltage coupled inductor


زبان مقاله : انگلیسی
محور مقاله : مهندسی برق
محل انتشار : هشتمین کنفرانس بین المللی پژوهش های کاربردی در علوم و مهندسی
آدرس وب سایت کنفرانس : 8carse.com
کد IOI مقاله : XKFK-AZBEKB
لینک مستقیم مقاله : https://isnac.ir/XKFK-AZBEKB
نمایش چکیده فارسی : https://isnac.ir/SA/XKFK-AZBEKB

سایر مقالات محل انتشار
  1. بررسی عناصر زیبایی‌شناسی حسی باغسازی فرانسه
  2. Optimizing Welding Techniques for Enhanced Structural Integrity in High-Temperature Alloys
  3. Evaluation of artificial intelligence in cyberspace security and data protection
  4. کاربرد تئوری HES در مدیریت و پایداری مراتع
  5. رابطه هوش هیجانی با استراتژی‌های مدیریت تعارضات در مدیریت پروژه‌های عمرانی
  6. Numerical investigation of the strength of adhesively bonded joints with different adherends
  7. Enhancing Airline Safety Management: Strategic Insights into KPI-Driven Oversight
  8. Investigating the vulnerability of carbonate (karst) and alluvial aquifers
  9. Investigating the destructive effects of using non-standard lubricants in the open gear of pellets factory discs and analyzing gear failures
  10. بررسی عددی جریان خون داخل کانال دایره ای به همراه جریان مغناطیسی
  11. مدل های پیش بینی رفتار خزشی در سوپر آلیاژهای ساخته شده به روش ساخت افزایشی
  12. Elevating Airline Innovation: A Strategic Approach to KPI-Driven Leadership
  13. یک رویکرد فازی بهینه برای بررسی موانع اجرای مدیریت پروژه چابک
  14. Elevating Airline Design and Production Excellence: A Strategic KPI Framework for DOA and POA Officers
  15. Elevating In-Flight Entertainment (IFE): A Strategic Approach to Performance Optimization