Preparation hollow like polymer particle via swollen polystyrene seed particle

soleyman hosseinzadeh1 Shahryar pashaei2 Zahra Khodaparast3 Marzie Khashman4 Alireza Hosseinzadeh5

Abstract :
Micron-sized monodispersed cross-linked polymer particles having a single hollow in the inside were produced by seeded polymerization for the dispersion of (toluene/ethylene glycol dimethacrylate)-swollen polystyrene (PS) particles prepared utilizing the dynamic swelling method. In this article, the particles at various conversions of the seeded polymerization were observed with an optical and SEM microscope in detail. From the obtained results, the formation mechanism of the hollow structure is suggested as follows. As seeded polymerization proceeds, polyethylene glycol dimethacrylate (PEGDMA) molecules precipitated in the swollen particle are trapped near the interface and gradually pile at the inner surface, which results in a cross-linked PEGDMA shell. PS which dissolves in the swollen particles is repelled gradually to the inside. After the completion of the polymerization, toluene in the hollow evaporates by drying, and PS clings to the inner wall of the shell uniformly.

Keywords : dynamic swelling method hollow micron size monodisperse cross linking


زبان مقاله : انگلیسی
محور مقاله : مهندسی شیمی
محل انتشار : اولین کنگره بین المللی نوآوری در مهندسی و توسعه تکنولوژی
آدرس وب سایت کنفرانس : iceiconf.ir
کد IOI مقاله : XYCB-ABAAD
لینک مستقیم مقاله : https://isnac.ir/XYCB-ABAAD

سایر مقالات محل انتشار
  1. بررسی مدل‌های موازنه (هزینه - زمان - کیفیت) در مدیریت پروژه‌ها
  2. رتبه بندی نظرات کاربران برخط با استفاده از روش وزن‌دهی بهبود یافته روش Dirichlet
  3. تأثیر نانو اکسید آلومینیوم بر خصوصیات فیزیکی و مکانیکی رس تثبیت‌شده باسیمان
  4. بررسی پارامترهای موثر بر خاک هیپ کارخانه تلاشگران مس نوید رفسنجان
  5. بررسی نفوذپذیری و آگلومراسیون در عملیات لیچینگ ستونی خاک هیپ کارخانه لیچینگ تلاشگران مس نوید رفسنجان
  6. مدیریت خشکسالی ، مهمترین بخش مدیریت منابع آب در ایران (مطالعه موردي مدیریت خشکسالی با تمرکز بر سيستم جامع پايش خشكسالي)
  7. تاثیر نرخ سرد شدن سرباره کوره ذوب مس بر روی ضخامت سرباره
  8. The Impact of Transportable Structures on Crisis Management after Earthquake
  9. بررسی معیارهای آسیب پذیری بافت های شهری در برابر حملات هوایی و انطباق نظام شهری خرم آباد با اصول پدافند غیرعامل و توسعه پایدار
  10. به مدار آوردن واحدهاي نيروگاهي با در نظر گرفتن قید تأمین امنیت در سیستم‌هاي تجديد ساختار يافته
  11. یک مبدل بوست سوئیچ-خازنی با شرایط کلید زنی نرم و بهره ولتاژ بالا
  12. ارائه معادلات حاکم بر رفتار استاتیکی سدهای لاستیکی
  13. رفتارسنجی سدهای لاستیکی پر شده با هوا
  14. افزایش ظرفیت کانال های PLC با استفاده از تکنیک الموتی در حوزه ی فرکانس-زمان
  15. مطالعه عددي آب شيرين كن چند مرحله اي (MED)