جستجو
Investigating the Behavior of Composite Shear Walls with Corrugated Shape Memory Alloys Plate and Steel Fiber Concrete under Cyclic Loading
Dr Amir Valaei Barhagh1
Abstract :
Adding reversibility and restoring plastic deformation in all structures, including composite shear walls, have been discussed in recent decades. The design parameters of composite shear walls can technically and economically affect these walls' behavior against the loads. In this study, the behavior of composite shear walls with corrugated nickel–titanium shape memory alloy (SMA) plates against cyclic loading as an innovation is investigated. Variables were the type of plate, corrugated plate type, and the strength grade of concrete used in the shear wall. On both sides of the wall, steel fiber-reinforced concrete (SFRC) was used. Compressive and splitting tensile strength tests were conducted to determine of tensile and compressive behavior of concrete. ABAQUS software was used to simulate the composite shear walls. The accuracy of the simulation method was evaluated compared to similar laboratory studies, and a good agreement was observed. The results showed that the use of SMA corrugated plates makes it possible to use composite shear walls' greater capacity and ductility to achieve a structure resistant to seismic loading. Using SMA plates in composite shear wall systems due to these alloys' special properties can be a practical step in improving seismic responses. The bearing capacity of composite shear walls with SMA plates is 1.4–2.25 times higher than composite shear walls with St37 plates, depending on the wave type and concrete grade. The use of SMA eliminates nonlinear behavior and residual strains of the shear wall composed of steel fibers and absorbs the wall's energy. Therefore, the energy in the boundary elements is significantly reduced.
Keywords : structural mechanics
زبان مقاله : انگلیسی
محل انتشار : Iranian Journal of Science and Technology, Transactions of Civil Engineering
آدرس وب سایت کنفرانس : https://ijstc.shirazu.ac.ir
کد IOI مقاله : ACGA-ACAZDA
لینک مستقیم مقاله : https://isnac.ir/ACGA-ACAZDA
سایر مقالات ارائه دهنده
- Uniform Seismic Hazard Spectra for Different Regions of Rasht, Iran
- Peak Ground Acceleration And Seismic Hazard Analysis of bandar-e-anzali city
- ارزیابی خرابی پیشرونده در ساختمان های فولادی با استفاده از روش مسیر جایگزین بار
- Investigation of buckling in thin-walled steel tanks with different thicknesses under seismic loading
- Investigation of buckling in thin-walled steel tanks with different thicknesses under seismic loading
- مقاوم سازی تیرهای بتن مسلح با استفاده از روکشهای فولادی
- The effect of steel coatings on the reinforcement of high strength concrete beams
- Investigating the Behavior of Composite Shear Walls with Corrugated Shape Memory Alloys Plate and Steel Fiber Concrete under Cyclic Loading