Use of suspension bridges theory for modeling the steel plate shear walls under out-of-plane loads

Saeid Sabouri-Ghomi1 Younes Jahani2

Abstract :
This paper presents the new finite element model of steel plate shear wall, SPSWs, systems under out-of-plane loadings using truss elements instead of shell elements. This type of loads is applied from soil pressure in deep excavations, water hydraulic pressure on marine structures, ice moving pressure in offshore structures and etc. The aim of this study is to provide a new modeling using the theory of suspension bridges. In the suspension bridges, some vertical cables from one side connected to the deck of the bridge and on the other side are connected to the main cable and transferred the bridge deck weight and other loads to the main cable. Also, main cable transfers these loads to the supports. The catenary cable elements are employed to model the bars; thus, a number of small elements, formed the bars. When the amounts of the loads are increasing, the suspension bridges theory has good capability to predict the behavior of the walls subjected to out-of-plane loading. In this paper, the steel plate shear wall is equivalent with bars in two directions and modeled by ABAQUS/CAE software. This type of modeling is like as soccer net, that bearing the loads in two directions. The results of finite element models are compared with theoretical relationships and indicated that the results of finite element models are closed to the theoretical relationships. Also, the proposed new model is compared with the shell element model and shown that the stress distribution and mid span displacement of the specimens are close to each other.

Keywords : finite element model steel plate shear wall out of plane loading suspension bridge cable


زبان مقاله : انگلیسی
محور مقاله : نو آوری و طراحی سازه های جدید
محل انتشار : دومین کنفرانس بین المللی ژئوتکنیک و مهندسی لرزه ای
آدرس وب سایت کنفرانس : icguee.ir
کد IOI مقاله : XYCD-ACCFG
لینک مستقیم مقاله : https://isnac.ir/XYCD-ACCFG

سایر مقالات محل انتشار
  1. ارزیابی رفتار پل های بزرگراهی با استفاده از سیستم جداسازی لرزه ای تحت متغیر های متنوع
  2. بررسی عملکرد لرزه ای سیستم مهاربند دندانه دار (Ribbed Bracing System)
  3. بررسی عملکرد لرزه ای پل های جداسازی شده در دو سطح زیر پایه و زیر عرشه و معرفی بهترین حالت
  4. بررسي تاثير جداگر لرزه‌ای لاستيكی بر كنترل ارتعاشات سوله صنعتی دو طبقه
  5. تحلیل پایداری پی و کوله‌های سد بلطاق با بهره‌گیری از شبیه‌سازی عددی
  6. تعیین میزان ِ آسیب ِ زلزله های آینده بوسیله آنالیز سایزموتکتونیکی گسل های مهم منطقه آذربایجان
  7. بررسی سایزموتکتونیکی زلزله های تاریخی و دستگاهی تاریخ ِ تبریز
  8. تکتونیک فعال و مطالعه ی فعالیت های نئوتکتونیکی منطقه تبریز
  9. روابط کاهیدگی پارامترهای حرکتی زمین در ایران
  10. مطالعه سه بعدی مکانیزم پایداری شیب‌های مسلح
  11. ارزیابی لرزه ای و بهسازی ساختمان یک مدرسه طبق ضوابط دستورالعمل بهسازی ساختمانهای موجود
  12. بررسی فرآیند تثبیت خاک رس و خاكهاي مسئله دار به روش نوین
  13. SIMULATING THE STRESS AND STRAIN BEHAVIOR OF LOESS VIA SCC MODEL
  14. تکنیک های مقاوم سازی و بهسازی ساختمانهای بتن مسلح
  15. کنترل لرزه ای نیمه فعال سازه های مجهز به میراگر جریان مغناطیسی با استفاده از توابع BP